Dodge Dakota ForumDodge Dakota PhotosDodgeDakota.net Membership
  Forums   Forum Tools
08:34:56 - 11/17/2024

Dakota Performance
FromMessage
frog
Dodge Dakota
JOIN HERE
 Email

12/29/2002
15:12:25

Subject: Highly Modified Elec. Fan?
IP: Logged

Message:
I have a lot of things done to my truck and wanted to put the electric fan in now.(BLACK AMGIC 150), but here is what I found....


Fan type: Puller
Mounting surface required: 18 in. x 16 in. x 4 1/4 in.
Fan diameter: 15 in.
Airflow cfm at 0 degrees: 2,800 cfm
Amp draw: 13.9
Adjustable thermostat: 180-240 degrees
AC relay: Yes
Typical application: 300 HP; 250 w/AC

I am over 300 HP... I can't do this modor what???

Help modded guys over 300 HP




Aaro
Dodge Dakota
JOIN HERE


12/29/2002
17:12:24

RE: Highly Modified Elec. Fan?
IP: Logged

Message:
Frog
Just do it ,if you don't live where it gets over 100 alot you should not have a problem and will like the 2+ mpg gain.The best place to mount it is towards the lower passenger side ( it won't cover the entire rad )


'97 , 5.2 , 2wd , auto , 3.55 lsd , 26" tall tires , JBA headers , ultra-flo cat back , Trans Go shift kit , 19# FMS injectors , under drive crank pully , electric fan -- black magic 150 , ported 50mm TB , msd coil , accel 9000 wires , 3923 plugs , Crower 1.7 RR with guide plates , "R/T" valve springs ,Mopar PCM -- CALF , K&N gen II cold air intake kit , 9" S&B air filter , IAT adjuster , "loose" factory converter that stalls at 2000 rpm , 2bbl M1 with large turtle .....



   P 1


Post a reply to this message:

Username Registration: Optional
All visitors are allowed to post messages


Name:
Email:
Notify me when I get a reply to my message:Yes  No

Icons:            

          

Subject:
Message:
 



Home | Forums | Members | Pictures | Contact Us

This site is in no way affiliated with Chrysler or any of its subsidiaries.