| From | Message |
ZZX1100
Dodge Dakota
JOIN HERE
12/05/2002
17:28:16
|
 Subject: roller rocker install
IP: Logged
Message:
just got my mopar 1.7 roller rockers can someone PLEASE direct me to a site with instructions on how to install these babes.
Thanks
|
R/T Superbee
Dodge Dakota
JOIN HERE
12/05/2002
17:35:33
|  RE: roller rocker install
IP: Logged
Message:
I trashed mine, but I think you can get them from Crower. And it was pretty simple, TDC, snug plus 1/4 turn, then next, next, next. You can also call Crower tech support for help> I called about 5 times.
|
ZZX1100
Dodge Dakota
JOIN HERE
12/05/2002
18:06:30
| RE: roller rocker install
IP: Logged
Message:
Great thanks....
howd you find TDC.
|
R/Truck
Dodge Dakota
JOIN HERE
12/05/2002
18:13:00
| RE: roller rocker install
IP: Logged
Message:
http://www.crower.com/pdf/DODGEINST.pdf
|
R/T Superbee
Dodge Dakota
JOIN HERE
12/05/2002
19:29:57
| RE: roller rocker install
IP: Logged
Message:
That was the hard part. When both lifters whent level was the answer and since they self adjust all my fears about being exact where without merit. Trust the instructions and do not go back and retighten after a cylinder is done, they will drop from loss of oil pressure. I did and had a ruff idle, had to go back and do it all over again and just followed the instuctions and it runs great!
|
ZZX1100
Dodge Dakota
JOIN HERE
12/05/2002
19:50:29
| RE: roller rocker install
IP: Logged
Message:
they will drop from loss of oil pressure?????
are you saying that after the initial rocker adjustment to not re-adjust a second time untill i fire it up and pump up the lifters..rite???
|
DakotaDan
*GenIII*
12/05/2002
20:07:09
|  RE: roller rocker install
IP: Logged
Message:
ZZX1100
These are sites I have kept in my favorites that were useful when I did mine
http://www.dodgedakota.net/boards/per/1049.html
http://www.dodgedakota.net/boards/v6/1756.html
http://www.dodgedakota.net/boards/per/4673.html
http://www.dodgedakota.net/boards/per/856.html
http://www.dodgedakota.net/boards/per/876.html
http://www.geocities.com/MotorCity/Track/9668/dRockers.html
http://www.twistedbits.net/~jon/WWW/DAKOTA/faq/Engine/roller_rocker_install.
html
http://www.dakota-truck.net/faq/Engine/roller_rocker_install.html
http://www.dodgedakota.net/boards/per/4440.html
Dan
Next Time You Think You're Perfect
~~~~~Try Walking On Water~~~~~
|
R/T Superbee
Dodge Dakota
JOIN HERE
12/05/2002
23:19:25
| RE: roller rocker install
IP: Logged
Message:
Yes ZZX, that is exactly what I am saying. When I did mine, by the time I finished the last one on a side, I noticed the first one was now loose. So I re-tightened, then a 1/4 more. Bad move. Do them and leave them alone. TRUST THE INSTRUCTIONS. Also don't be afriad to start with valve cover off, so you can listen for ticking. Dodge is cool, no oil squirts out.
|
ZZX1100
Dodge Dakota
JOIN HERE
12/06/2002
09:31:49
| RE: roller rocker install
IP: Logged
Message:
R/T Superbee
R/Truck
DakotaDan
THANKS..
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
