| From | Message |
sandman
Dodge Dakota
JOIN HERE
11/08/2002
12:04:28
|
 Subject: Stroker Kit For 4.7
IP: Logged
Message:
How long before we see a stroker kit???? I would love to have a 5.2-5.5 OHC engine.
|
j
GenIII
11/08/2002
12:11:50
| RE: Stroker Kit For 4.7
IP: Logged
Message:
I was just wondering the same thing. The 5.9ers get all the fun.
2000 4.7 CC auto, clear corners, Magnaflow catback, Kenne Bell s/c.
|
Demon Dakota
DakotaEnthusiast
11/08/2002
15:39:53
| RE: Stroker Kit For 4.7
IP: Logged
Message:
I'm kinda wondering that myself. There's plenty of space for a bigger crank! Our 3.405" crank could easily go to 3.58-3.6" range. Hell, while we're on the subject, why not make it a square engine (same bore and stroke). That would be pretty darn smooth in my opinion.
K&N Drop in AF
True Dual exhaust and removed third cat
HO Cams & HO Intake
Modified TB
Autolite 3923 Plugs
TPS @ .76 VDC
IAT Adjuster Mod
|
.alex.
Dodge Dakota
JOIN HERE
11/08/2002
15:55:00
| RE: Stroker Kit For 4.7
IP: Logged
Message:
In talking with KRC, there's no reason to try and make bottom/mid-range torque with this motor (which is what a stroker motor makes). It's too small to make a stroker package very useful. The way to get power out of a small motor is wind the sh*t out of it....
At least that's what we talked about.
|
sandman
Dodge Dakota
JOIN HERE
11/10/2002
00:50:30
| RE: Stroker Kit For 4.7
IP: Logged
Message:
Winding it up is good too. I have built several import 4 cylinders to survive at 10,000 RPM's as daily drivers. I had one vechile that I drove as a daily driver set up to redline at 10,000 RPM's and I would shift it at 9,500. I had a header and a 2" pipe into 4' cherry bomb with 3" out let. That thing would scream. I scared the heck out alot of people. The cam was so wild that even with fuel injection and a bunch of electronic tricks raw gas would flow out the tail pipe at idle. I still drive it as a daily driver but took the valve train back to stock and un-did all of the electronic mods and put factory exhuast back on.
|
buddy jones
Dodge Dakota
JOIN HERE
11/10/2002
16:39:05
| RE: Stroker Kit For 4.7
IP: Logged
Message:
I'm not sure about this, but I'm almost possitive that I saw a stroker kit for the 4.7 liter somewhere, but I'm not sure where it was.I think it cranked the cubes up to 330 comething.
|
xplikt
GenIII
11/10/2002
17:06:04
| RE: Stroker Kit For 4.7
IP: Logged
Message:
Have you seen what them 4.0Ls stroke to. They can take it to the size of our engines. 4.56s and a Kenne Bell is a for sure cure for stroking. That's my goal anyways..
-Mike
http://www.dodgetruckworld.com/xplikt/
2002 2WD RC SLT 4.7L 5spd 3.92 LSD
MBRP Single in/out, straight piped 3rd cat, turndown tip
Hotchkis swaybars and springs
Bilstein custom tuned shocks
Roadmaster Active Suspension
Shaved emblems and antennae
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
