| From | Message |
DAK2
*GenIII*
 
10/09/2002
22:44:22
|
 Subject: BERND will this work
IP: Logged
Message:
Will this work as a good blower
at 2600 RPM
40 cuM/s
180 Kpa pressure
into a 36" diam. pipe
Y2K DAK 3.9L 5 Spd OS/2 Keeps going&going&going
|
Bernd
*GenIII*
10/10/2002
07:57:10
|  RE: BERND will this work
IP: Logged
Message:
I'm coming up with some pretty outrageous (converted) numbers for this. What's the site?
180 kPa = 26PSI
1997 Dodge Dakota SLT - V6
Supercharged/Intercooled @ 10# w/Nitrous
14.55 @ 96.01mph
|
DAK2
*GenIII*
10/10/2002
22:18:28
|  RE: BERND will this work
IP: Logged
Message:
Actually no site but one of the blowers I work on
Actual conversion to english would be
26 PSI and about 85000 cu ft/min
The blower is used to hold the Burden up in
a Blast Furnace.
BUT I HAD TO ASK :)
Y2K DAK 3.9L 5 Spd OS/2 Keeps going&going&going
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
