| From | Message |
rsudol
Dodge Dakota
JOIN HERE
10/07/2002
12:20:29
|
 Subject: F & B Throttle body
IP: Logged
Message:
Just installed a new F&B billet throttle body. Works great, immediately noticed a big difference in response and idle. This is a well made unit with very good instructions w/pics. and mounting hardware is included..
|
DakotaDan
*GenIII*
10/07/2002
12:40:55
|  RE: F & B Throttle body
IP: Logged
Message:
What size F&B and engine ?????
Dan
"Can You Hear Me Now"........................................GOOD !!!!!!!!!!!!!!!!!!!!!!!!!
|
rsudol
Dodge Dakota
JOIN HERE
10/07/2002
12:43:37
| RE: F & B Throttle body
IP: Logged
Message:
Hi Dan,
50MM on a 1998 Dakota 5.2L
|
rsudol
Dodge Dakota
JOIN HERE
10/07/2002
12:43:53
| RE: F & B Throttle body
IP: Logged
Message:
Hi Dan,
50MM on a 1998 Dakota 5.2L
|
Pistolero
Dodge Dakota
JOIN HERE
10/07/2002
13:19:36
|  RE: F & B Throttle body
IP: Logged
Message:
I just received my F&B last week, but haven't installed it yet. Did you receive an airhat mounting stud? I got the packet with the sensor screws and TB holddown bolts, as well as an airhat nut, but I don't have an airhat stud to screw into the TB. How did you mount your airhat to your TB? Did you have to make an "S" bolt? Thanks...P
P.S. Sam, if you see this post, I haven't gotten home yet to check my email, so sorry if you've already answered...
|
rsudol
Dodge Dakota
JOIN HERE
10/07/2002
13:30:21
| RE: F & B Throttle body
IP: Logged
Message:
I already had a home made cold-air intake with a K&N round 10 inch open air filter. I had this attached to my OE throttle body with a home bent "S" bolt..I got the bolt (straight) from a local auto parts store (pep boys) and simply bent it to fit in a bench vise with vise-grips..Real easy to make an "S" bolt and only cost approx. $3.00.
P.S. the "S" bolt worked perfectly with the new TB..I didn't have to change a thing..
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
