| From | Message |
Livinonline
Dodge Dakota
JOIN HERE
9/30/2002
15:55:14
|
 Subject: Changing my 3.92 to 4.10
IP: Logged
Message:
I have a 2001 CC 4x4 4.7L,
I've been looking at changing my current 3.92 out to the 4.10, currently I'm running 31's, on my truck, am I going to feel a difference, or is this not even worth it?
|
Dan Gruber
GenIII
 
9/30/2002
17:22:14
| RE: Changing my 3.92 to 4.10
IP: Logged
Message:
That's about 4.5% shorter gearing, and you'd feel a difference but...
You can't do it. 2000 and newer Dakotas use a Chrysler Corporate 205mm (8 inch) front end. Nobody makes gears for it except Chrysler, so you're limited to what Chrysler makes, either 3.55 or 3.92.
I went through the same search a while back and ended up swapping my 3.55's for 3.92's back in April.
Dan
2000 CC SLT 4.7 4X4 Auto 3.92 LSD
3 inch Performance Accesories lift & 32 inch BFG MT KM's
|
Livinonline
Dodge Dakota
JOIN HERE
9/30/2002
17:52:19
| RE: Changing my 3.92 to 4.10
IP: Logged
Message:
DAMN YOU CHRYSLER!!!
Dan,
Thanks for the info, that sucks, but at least I didn't spend the next 8 hours looking for it.
|
xplikt
GenIII
9/30/2002
19:06:16
| RE: Changing my 3.92 to 4.10
IP: Logged
Message:
Dan forgot to mention that only pertains to the 4WDs, we 2WDs are set!
2002 2WD RC SLT 4.7L 5spd 3.92 LSD
MBRP Single in/out, straight piped 3rd cat, turndown tip
Hotchkis swaybars and springs
Bilstein custom tuned shocks
Roadmaster Active Suspension
Shaved emblems and antennae
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
