| From | Message |
Cris
Dodge Dakota
JOIN HERE
9/27/2002
16:31:06
|
 Subject: 408 Stroker on V6
IP: Logged
Message:
Is it possible to put most the stroker kit in the v6. because if the pistons will fit the 5.2L they will fit the 3.9L. And has any one done yet? If possible how much HP would i be looking at?
|
kota on 20s
GenIII
9/27/2002
16:33:32
|  RE: 408 Stroker on V6
IP: Logged
Message:
the crank will be verry expencive...just do a engine swap
-Eric
Injection is nice, but i'd rather be blown.
5.2L, 5speed. Powerdyne SC, 50mm TB, 2bbl M-1, 1.7RR's, MSD 6BTM, ciramic JBA headers, carsound cat, dumped gibson
|
1Flamed92Dak
GenII
9/27/2002
21:10:39
| RE: 408 Stroker on V6
IP: Logged
Message:
im thinking also of stroking my V-6 atleast that way i dont have to worry about SMOG Related things i can have the Crank Stroked for 150 dollars as for the 408 Stoker Kit fitting the V-6 there is no way it won't fit the 5.2l either the Stroke on the 5.9l is way different, the 360 has a 3.58 stroke and the 318 has a 3.31 stroke and the mains are larger also thats why the 360 oil pan doesn't fit but as for stroking the 3.9l it pretty much straight foward just find a Stroker Kit for a 318 and see what the STROKE is and have your crank reground the same and walla.
|
Big59er
Dodge Dakota
JOIN HERE
9/28/2002
00:50:20
| RE: 408 Stroker on V6
IP: Logged
Message:
This may be off the beaten path of the bore and stroke query but do they have 3.9 V6 to V8 conversion packages? I know they had them for the Fiero 2.8's but I was just curious if they did that with other engines.
|
kota on 20s
GenIII
9/28/2002
01:25:50
| RE: 408 Stroker on V6
IP: Logged
Message:
a conversion IS leagle. at least it is in CA. the only thing is, the engine has to come out of a car that is earlier than the vehicle (example: a 99 360 can go into a 98 truck)
a stroker engine mostlikely will not pass smog.
a stroker is also harder to tune than a stock V8. you will probably need a split second box, and a lap top. and even then it might take a while to figure out the program.
-Eric
Injection is nice, but i'd rather be blown.
5.2L, 5speed. Powerdyne SC, 50mm TB, 2bbl M-1, 1.7RR's, MSD 6BTM, ciramic JBA headers, carsound cat, dumped gibson
|
Bernd
*GenIII*
9/28/2002
09:00:30
| RE: 408 Stroker on V6
IP: Logged
Message:
Not always required (S/S boxes). We've got two 408's running without any "boxes" on them. Just don't go too crazy on the head/cam combo and you'll be fine.
1997 Dodge Dakota SLT - V6
Supercharged/Intercooled @ 10# w/Nitrous
14.55 @ 96.01mph
|
kota on 20s
GenIII
9/28/2002
12:17:37
| RE: 408 Stroker on V6
IP: Logged
Message:
bernd, have you stroked any 318's?
-Eric
Injection is nice, but i'd rather be blown.
5.2L, 5speed. Powerdyne SC, 50mm TB, 2bbl M-1, 1.7RR's, MSD 6BTM, ciramic JBA headers, carsound cat, dumped gibson
|
rt5.9stroker
Dodge Dakota
JOIN HERE
9/29/2002
19:00:39
| RE: 408 Stroker on V6
IP: Logged
Message:
where you get or order a double roller timing chain for a v-6 3.9 98 dodge dakota . how much?
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
