| From | Message |
20004.7
Dodge Dakota
JOIN HERE
8/06/2002
12:07:57
|
 Subject: h.o. cams!! in a 2000 4.7??
IP: Logged
Message:
if you have installed the h.o. cams in 2000 4.7!!! please let me know do's dont's...any good any bad.. and how many miles on it before and now..i have had cams for a while.. but i'm worried about blowing something up or just costing $$$.. i'm a hourly worker paying payments!! so help me with your info thanks..
|
maynardh
Dodge Dakota
JOIN HERE
8/06/2002
20:24:27
|  RE: h.o. cams!! in a 2000 4.7??
IP: Logged
Message:
I just did it about 2 weeks ago in my 2000 4x4.
It had 139,000 km (90k miles?) on it when I did it. About 1500 miles since then. Well worth it!!!
If you like, give me your email address. I've already sent a few tips with the instructions to a few other guys and I'll send them to you.
Trust me, it's a lot easier than everybody makes it out to be.
|
gsmarquis
Dodge Dakota
JOIN HERE
8/06/2002
21:52:58
|  RE: h.o. cams!! in a 2000 4.7??
IP: Logged
Message:
Much easier than it looks.....take you time to set engine to TDC and double check your 12:00 positions on the cam sprockets....also very important DO NOT SCRATCH UP THE BEARING CAPS AND PUT THEM BACK THE WAY THEY CAME OUT....they are labeled
best mod i have ever done.
|
20004.7
Dodge Dakota
JOIN HERE
8/07/2002
01:22:32
| RE: h.o. cams!! in a 2000 4.7??
IP: Logged
Message:
maynardh, yes please send all info you can.puddinhea@aol..thanks
|
maynardh
Dodge Dakota
JOIN HERE
8/07/2002
06:17:37
| RE: h.o. cams!! in a 2000 4.7??
IP: Logged
Message:
I never set the engine to TDC. I never took the sprockets out of the chains. I just put the cams in the same way the old ones came out.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
