Forums
Forum Tools
|
 |
08:22:34 - 11/17/2024
Dakota Performance
| From | Message |
EyeTrip
R/T
 
8/16/2002
11:56:45
|
 Subject: RE: powerdyne users...HELP!!
IP: Logged
Message:
I have heard some engines can get 6# without detonation. It has to do with how smooth the heads are and fuel ratio.
And as for the critics, a stock engine will stand up a long time to 6#'s. And it's a lot easier to get emission checked when it's time. So in essence, what ever floats your boat it does have advantages. Don't be so narrow-minded.
HomePage
|
kota on 20s
GenIII
8/16/2002
12:25:33
| RE: powerdyne users...HELP!!
IP: Logged
Message:
i wish i had 4k to spend on $hit i knew nothing about too!! i bought it used, for a VERRY good price. the only other thing that i have bought for it is a MSD 6BTM (brand new for $200, another deal) and a $14 relay.
once i get it working properly, i could always sell it and make a profit on it, or at least get my money back.
even if i could afford a crate motor, a SC is WAY easier to install, easier to sell, it is WAY easier to pass CA smog, gets better gas miledge, and so on.
now lets get back to the topic....
-Eric
Injection is nice, but i'd rather be blown.
5.2L, 5speed. Powerdyne SC, 50mm TB, 2bbl M-1, 1.7RR's, MSD 6BTM, ciramic JBA headers, carsound cat, dumped gibson
|
kota on 20s
GenIII
8/19/2002
20:09:33
| RE: powerdyne users...HELP!!
IP: Logged
Message:
I FOUND THE PROBLEM!!!
when i put the msd coil on, i connected the wires verry slopy, and i guess whenever i got on it, it shorted out. DOH!!
i connected the stock coil for now, and the problem has gone away.. HELL YEAH!!
thanks you guys for all of your thoughts, and imput. i hope i can return the favor someday!!
-Eric
Injection is nice, but i'd rather be blown.
5.2L, 5speed. Powerdyne SC, 50mm TB, 2bbl M-1, 1.7RR's, MSD 6BTM, ciramic JBA headers, carsound cat, dumped gibson
|
DeepDak
Dodge Dakota
JOIN HERE
8/19/2002
23:07:49
| RE: powerdyne users...HELP!!
IP: Logged
Message:
Eric:
Congrats on the SC!!! I'm trying to organize a get together in Fontana on Sept. 21 or 22, which is the last street legal drags for this season. You interested??
Oh, I'm considered lowering the front using 2"a-arms, but will I rub? I'll have 2" of clearance after the drop, which was the same amount of clearance with my previous project coils. I'm wondering if the 2" a-arms will change my camber to the point that rubbing will be a problem? I currently have 4" of clearance using the stock R/T coils.
Eli
|
kota on 20s
GenIII
8/20/2002
01:16:47
| RE: powerdyne users...HELP!!
IP: Logged
Message:
yeah ill go.
you are using western arms right? you should be fine with the 2" arms. i have heard from other RT owners that the 3" DJM arms suck. they chew up the lip of the rim while turning.
-Eric
Injection is nice, but i'd rather be blown.
5.2L, 5speed. Powerdyne SC, 50mm TB, 2bbl M-1, 1.7RR's, MSD 6BTM, ciramic JBA headers, carsound cat, dumped gibson
|
DeepDak
Dodge Dakota
JOIN HERE
8/20/2002
03:14:20
| RE: powerdyne users...HELP!!
IP: Logged
Message:
You used Western Chassis right? Any problems or customizing involved? What have you heard about the 2" DJM a-arms? I've had a streak of problems with parts lately and I'm looking for the a-arm with the least amount of headaches. Thanks
Eli
|
Rascal
GenIII
8/20/2002
08:12:31
| RE: powerdyne users...HELP!!
IP: Logged
Message:
Eric,
Glad to hear you got it going! Do a burnout for me!
Rascal
98 SLT 2wd 5.2 , Powerslots, Hawk pads, Snugtop hard tonneau cover, Rancho brushguard and sidesteps, Flowkooler, Edelbrock shocks and dbl timing chain, Flowmetrics TB, Hella 500 lights, Magnacore wires, Autolites, Black Magic #150 and #110, etc...and a 57 Harley Panhead
|
kota on 20s
GenIII
8/20/2002
10:05:49
| RE: powerdyne users...HELP!!
IP: Logged
Message:
rascal, ill do :-)
eli, i have only heard bad things about the 3" arm (i didnt know they made a 2" one)
i have the western arms on my truck, and the only thing that they had to do was put the ball joints in from the stock arm.
my rims are only 8" wide, so i dont know if you will have problems with the 9" wide RT wheel.
talk to sam (rtdkota). he know about the djm arms.
-Eric
Injection is nice, but i'd rather be blown.
5.2L, 5speed. Powerdyne SC, 50mm TB, 2bbl M-1, 1.7RR's, MSD 6BTM, ciramic JBA headers, carsound cat, dumped gibson
|
Joe
Dodge Dakota
JOIN HERE
1/20/2003
18:54:46
|  RE: powerdyne users...HELP!!
IP: Logged
Message:
Your problem was more than likely the coil being to close to the PCM
|
kota on 20s
GenIII
1/21/2003
01:01:47
| RE: powerdyne users...HELP!!
IP: Logged
Message:
Nope
~Eric
Single cam, non-VTEC
|
| | <<Oringinal Post <<Previous Page P 2 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
|
