Forums
Forum Tools
|
 |
12:18:28 - 12/30/2024
Dakota Performance
| From | Message |
DakotaZex
Unregistered
4/09/2001
14:48:29
|
 Subject: Nitrous on 3.9L
IP: Logged
Message:
Just wondering all of your opinions on the
3.9L being able to handle a 75hp or 100hp
shot of nitrous with no internal upgrades i.e.
cam, crank, pistons etc. The kit I will be using
is the general ZEX kit.
Thanks,
Josh
|
Bernd
GenIII
4/09/2001
20:57:24
| RE: Nitrous on 3.9L
IP: Logged
Message:
Before I went to the S/C on my '97 V6...I was running the NX 100HP Shot at the track and the 75HPO shot on the street. No problems at all but you will need a good ignition system and nitrous retard. The MSD Digital-6+ with the Blaster-SS coil is what I ran (and still do).
It allows for a single stage retard (activated by the nitrous solenoid) and a nitrous rev-limiter and standard rev-limiter as well (two-stage rev-limiter). You'll also need to run one step colder on the plugs and .005" smaller on the gap to compensate for the higher cylinder pressure from the nitrous.
Otherwise...it was a LOT of fun.
Performance wise:
225WHP and 381TQ...that's at the REAR wheels. (What a rush from a V6!)
Bernd D. Ratsch
1997 Dodge Dakota SLT
Supercharged w/Nitrous
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
|
