From | Message |
juniork Dodge Dakota JOIN HERE ![Email](http://www.dodgedakota.net/amb/icons/email.gif)
5/31/2002 11:42:01
|
Subject: how do I get more torque? IP: Logged
Message: How would I get a little more low end torque on my 2002 4.7L 5-speed 3.55 LSD, without putting in the HO cams. So far I have a gibson cat-back dual rear exit exhaust, a TB spacer, Cold air intake, and I polished my TB. Will a pwer control module do the trick? if not, what?
|
Clevite 77 Dodge Dakota JOIN HERE
5/31/2002 11:47:06
| RE: how do I get more torque? IP: Logged
Message: well a less restictive exhaust like the one you have, won't help low end any. Switch over to the 3.92's LSD I have them in my truck and their awesome
|
xplikt Dodge Dakota JOIN HERE
5/31/2002 11:50:28
| RE: how do I get more torque? IP: Logged
Message: Increase displacement is the best way I know of to increase torque. Another way would be some sort of alternative forced induction or nitrous.
There isn't much you can do to really increae torque that isn't expensive. You could move and tune your rpm band a bit more, but that would be getting the HO cams. Or get larger gears like 4.11 or 3.92s, but this isn't really increasing engine torque.
Most of the stuff you have is just freeing up some of the lost power from stock engine quality, if you want the power, you really do have to pay to get it :|
PCM would help, but then you might as well get the HO cams.
You can gut/replace/straight pipe your third cat. The "right" shop can set you up for usually around 50 bucks.
|
Smarty Pants Dodge Dakota JOIN HERE
5/31/2002 11:54:08
| RE: how do I get more torque? IP: Logged
Message: for restored Low end torque,
1. Put the stock exhaust back on. If you'd dynoed before and after, you'd see you lost your money.
2. Put the TB spacer on your desk as a paper weight where it belongs.
3. Get a Stage 2 Jet Chip, then put it on your desk on another stack of papers, cause it's more use there than on your 4.7.
Don't research this stuff much, do ya?
|
Dat was funny Dodge Dakota JOIN HERE ![Email](http://www.dodgedakota.net/amb/icons/email.gif)
5/31/2002 13:07:12
| RE: how do I get more torque? IP: Logged
Message: Smarty Pants your da man!
|
MikeD R/T
![User Profile](http://www.dodgedakota.net/amb/icons/profile.gif)
![](http://www.dodgedakota.net/members/profiles/1190
/thumbnail.gif)
5/31/2002 13:13:42
| RE: how do I get more torque? IP: Logged
Message: Here is a way that will eliminate your torque problem all together.
Trade in your 4.7 for an R/T :)
~Mike~
'01 R/T MP 2400 Stall, True Duals w/ Flowmaster 40 series, M-1 2bbl, F&B 52mm TB, Airaid, JBA headers, JBA 9mm wires, Kenne Bell Optimizer II, 180 t-stat, 3rd cat removed, Chrome R/T badges Awating Install: 2.02 Ported Magnum R/T Heads, Kammer Cam, 1.6 RR's
|
juniork Dodge Dakota JOIN HERE ![Email](http://www.dodgedakota.net/amb/icons/email.gif)
5/31/2002 13:20:41
| RE: how do I get more torque? IP: Logged
Message: after driving my friends 2001 CC R/T, I kind of wish I did get one. I can beat him in the 1/4 mile, but I love his low end torque. I only wish it came in 5-speed.
|
xplikt Dodge Dakota JOIN HERE
5/31/2002 13:23:00
| RE: how do I get more torque? IP: Logged
Message: Stroke it (the engine I mean).
|
R/Truck Dodge Dakota JOIN HERE ![Email](http://www.dodgedakota.net/amb/icons/email.gif)
5/31/2002 13:32:09
| RE: how do I get more torque? IP: Logged
Message: Stop beating your friends and stroke it!
The only way to make these trucks go fast is to dig deep down into the wallet and shell out some money. I never was satisfied with all my little $100-300 modifications, it's the ones that take all day and cost $500-up that will make you smile.
|
D Dodge Dakota JOIN HERE
5/31/2002 15:24:55
| RE: how do I get more torque? IP: Logged
Message: save your cash, dont waste them on bolt ons...
buy a kenne bell or paxton, I wish I had saved
my cash from bolt ons, I could have had the
charger by now ; ( I'm half way there though !
D
01/4.7/CC/airaid+3"homebrewed/180stat/Jet2
TBspacer/ported-polished68mmTB/Dynomax
RaceWeldedMuffler+3"catback/NoClutchFan/
DJMdrop3-6
HO intake manifold, HO cams and Sure Grip
Limited Slip waiting to install !
http://photos.yahoo.com/bc/p0intless/lst?.dir=/
|
Demon-Xanth Dodge Dakota JOIN HERE
5/31/2002 15:38:47
| RE: how do I get more torque? IP: Logged
Message: I swapped out the muffler for a Dynaflow, but I'll be the first to admit that I didn't gain any power from it (I actually lost a bit). But man do I love the way it sounds, and that's why I did it.
...think a Cummins+NV5600 would fit in it? :D
|
xplikt Dodge Dakota JOIN HERE
5/31/2002 15:40:04
| RE: how do I get more torque? IP: Logged
Message: Wonder how much the 4.7Ls could be stroked to, I havn't looked into it at all.
|
kota on 20s GenIII
![User Profile](http://www.dodgedakota.net/amb/icons/profile.gif)
![](http://www.dodgedakota.net/members/profiles/1100
/thumbnail.gif)
5/31/2002 16:39:36
| RE: how do I get more torque? IP: Logged
Message: a GRIP of money! everything would have to be custom machined since there are no cranks for the 4.7's (aftermarket cranks that is)
Eric, 98 5.2 5speed, K&N gen II, 50mm TB, 2bbl M-1, 1.7RR's, JBA ciramic headers, carsound cat, dumped gibson, and a lot more
|
juniork Dodge Dakota JOIN HERE ![Email](http://www.dodgedakota.net/amb/icons/email.gif)
5/31/2002 21:48:41
| RE: how do I get more torque? IP: Logged
Message: I can't buy a supercharger because it will void my 7yr 100,000 mile warranty. When that runs out, I will probably rebuild and get one then. The milage I have been putting on the truck, I figure in about four years. I was trying to see if any bolt ons will give me more torque, I did not want to take the internals apart yet.
|
handi2 GenIII
![User Profile](http://www.dodgedakota.net/amb/icons/profile.gif)
![](http://www.dodgedakota.net/members/profiles/1147
/thumbnail.gif)
5/31/2002 23:07:02
| RE: how do I get more torque? IP: Logged
Message: Go back to stock and you will have more torque. I think before I get carried away with any more "little" mods I am going to sell all the things I have bought and go back to stock. Only about 700 miles on the items listed below. The truck has 1,200 miles total. I also have an Airaid Intake for a 4.7 that was on for 100 miles.
http://photos.yahoo.com/handi254310
2002 Quad Cab SLT Plus 4.7 Every Available Option Access Tonnoue Cover/Bedrug/360 Air Intakez/Jet Stage 2 180 Robertshaw/Roadmaster Active Suspension Street Scene Grill Inserts
|
SuperBee Dodge Dakota JOIN HERE ![Email](http://www.dodgedakota.net/amb/icons/email.gif)
6/01/2002 11:05:45
| RE: how do I get more torque? IP: Logged
Message: find a caddy 500 cube engine and put that in :-P
|
Danny Price Dodge Dakota JOIN HERE ![Email](http://www.dodgedakota.net/amb/icons/email.gif)
6/01/2002 11:39:03
| RE: how do I get more torque? IP: Logged
Message: Here is a way that will eliminate your torque problem all together.
Trade in your 4.7 for an R/T :)
Nicely put :)
|
| P 1 |
|
Post a reply to this message:
Username Registration: Optional All visitors are allowed to post messages
|