| From | Message |
TJ Alsbury
Dodge Dakota
JOIN HERE
5/13/2002
04:00:12
|
 Subject: 4.7 HO dealer trouble
IP: Logged
Message:
My Local dodge dealer (After hours) called me today and said they were unable to provide me with any of the HO parts for the 4.7 due to warranty restrictions. He also stated that the cams will not fit on the original heads based on a new design and that the intake manifold is shaped differently and will not bolt properly to my block. I think hes full of crap and thought i would ask a better source. They dont even have a 4.7 HO i could take a look at. So im at a loss i could really use some new toys but till i find out the details im looking into a new bumper and bigger wheels.
TJ
2001 4X4 CC 4.7L V8
Patriot Blue/Silver Stripe
|
CW
GenIII
5/13/2002
08:50:45
|  RE: 4.7 HO dealer trouble
IP: Logged
Message:
He is full of it as I have both on my truck as we speak.
2001 4.7HO RC 5sp 3.92 LSD
Click on thumbnail for mods.
|
Dr0p0ff
GenIII
5/13/2002
09:04:34
| RE: 4.7 HO dealer trouble
IP: Logged
Message:
TJ.. remember you are ordering the parts for your "Jeep" :o)
Keep On Truckin!
Sgt G
|
TJ
Dodge Dakota
JOIN HERE
5/13/2002
11:40:16
| RE: 4.7 HO dealer trouble
IP: Logged
Message:
Thats what i wanted to hear CW! Is that manifold the same design as our OEM IE: Throttle body location and such? I think ill try another dealer out of Like Los Angelas or even Nevada if i have to. Thanks for the Hint there DrOpOff Ill use it.
|
Quad47
Dodge Dakota
JOIN HERE
5/13/2002
11:53:08
| RE: 4.7 HO dealer trouble
IP: Logged
Message:
Depending on your confrontation value I would go back to the same person who told you that crap and call him on it. And if you really want to get knockdown service from him tell him that your'e going to contact Chrysler and tell them just how honest and helpfull he was in answering all your questions and how that should increase they're
Five Star rating on that dealership:) How 'bout that!
|
B1llyw
GenIII
5/13/2002
14:06:30
| RE: 4.7 HO dealer trouble
IP: Logged
Message:
Koller Dodge quoted me $110 on the HO intake manifold last week. I'd imagine they have a pretty good price on the cams too.
http://www.worldparts.com/kollerdodge/
Bill White - 2002 QC 4x4, SLT , 4.7, 5 spd, 3.92's w/LSD, Airaid, MBRP Super Single, Hurst T-Handle, BFG A/T's, IAS Shocks, 180 T-Stat, Jet Chip - Stage II
|
D
Dodge Dakota
JOIN HERE
5/13/2002
14:34:42
| RE: 4.7 HO dealer trouble
IP: Logged
Message:
just ordered the intake today, he said all the
HO parts are in Detroit, so it would take 3 days
to get it...no biggie!
Thousand Oaks Chrysler/Dodge (California)
$161.00
CW: what about the gaskets for the manifold?
do they come on it already, I saw your one had
them in the picture...$16.00 each is way too
much. could'nt I just reuse the stock gaskets?
14,000 miles on the motor?
|
dugj
Dodge Dakota
JOIN HERE
5/13/2002
17:55:06
| RE: 4.7 HO dealer trouble
IP: Logged
Message:
what kind of gains are poeple getting with these HO. would it work on a 2000 4.7 engin. thanks
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
