| From | Message |
TML
Dodge Dakota
JOIN HERE
5/07/2002
19:14:09
|
 Subject: Ford injectors
IP: Logged
Message:
Does anyone know if the Ford Motorsports injectors in 24lb. will work in our trucks? I have been considering these, but I need to know if they will work. Are these better than the 19lb. injectors? I have read where the 24lb. injectors work best with air meters with revised calibrations that have been specially trimmed for high flow rates. It states that they require fuel and air delivery systems upgrades, and changing computer sensors. Does this apply to our trucks? Any help would be appreciated.
2000 QC Sport Plus 4x4 5.9L 3.92LS, every factory option
equal-length headers and larger y-pipe
Magnaflow single in/ dual out
Autolite 3923's, indexed
Kenne Bell (Taylor) wires
180 stat
Redline Water Wetter
S-bolt
Homemade 4" cold-air induction
Baffled removed from air hat
K&N air filter
Mobil 1 and Purolator
Perma-Cool auxiliary oil cooler
Map sensor mod
TPS set at .774
clutch fan removed (electric fan only on thermal switch)
Future mods:
MSD coil
M1 intake
1.7 roller rockers
52mm throttle body
underdrive crank pulley
|
slider_buck
Dodge Dakota
JOIN HERE
5/07/2002
19:36:57
| RE: Ford injectors
IP: Logged
Message:
i recently put a set of 24 lb motorsports in mine and it runs perfectly fine.
|
TML
Dodge Dakota
JOIN HERE
5/08/2002
09:12:07
| RE: Ford injectors
IP: Logged
Message:
Hey slider buck,
Do you know what part# injectors you used? I have seen where there is two different kinds of Ford Motorsports injectors. There is the standard ones, and a racing injector. I wonder what the difference is. Where did you get yours from? Thanks.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
