| From | Message |
AJ
Dodge Dakota
JOIN HERE
5/07/2002
12:27:53
|
 Subject: o2 sensor wiring
IP: Logged
Message:
I'm looking to install an a/f gauge. Wondering if anyone nows which wire to tap into and which o2 sensor would give me a better reading. I would like to tie into as close to pcm as possible for a nicer install. So any info leading to a wiring diagram or any help at all would be greatly appreciated. Thanx.
|
conig
Dodge Dakota
JOIN HERE
5/07/2002
14:06:58
|  RE: o2 sensor wiring
IP: Logged
Message:
I need this info as well.
|
slider_buck
Dodge Dakota
JOIN HERE
5/07/2002
18:47:21
| RE: o2 sensor wiring
IP: Logged
Message:
look at speedtweaks.net go under tips and tricks. i did it the way bernd talks about wiring it up at the pcm. i beleive it is the orange/ brown wire.
|
kota on 20s
GenIII
5/07/2002
19:05:15
| RE: o2 sensor wiring
IP: Logged
Message:
it also says its better if you use a seprate o2 sensor for better accuracy. how do you do that?
Eric, 98 5.2 5speed, K&N gen II, 50mm TB, 2bbl M-1, 1.7RR's, JBA ciramic headers, carsound cat, dumped gibson, and a lot more
|
slider_buck
Dodge Dakota
JOIN HERE
5/07/2002
19:38:45
| RE: o2 sensor wiring
IP: Logged
Message:
most of the a/f ratio kits come with a nut that you can get a muffler shop to weld in somewhere close to your headers/manifold. then all you do is thread it in like your regular one and hook it up to the a/f meter
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
