| From | Message |
Tim
Dodge Dakota
JOIN HERE
4/11/2002
13:30:31
|
 Subject: 1.6 roller rockers
IP: Logged
Message:
Has anyone used the 1.6 RR from mopar? What can I expect? I plan on a larger cam in the future so I am going with the 1.6 to make the valve train full rollered. I have installed RR on other motors so the install is no problem. Just looking for feed back on any problem encountered or any positive comments. Any increase in gas milage.
98 5.2 CC 5 speed. MP headers, MP 3 inch exhaust, 3 inch cat, ported throttle body M1 intake, KN FIPK, MSD 6AL
|
R/Truck
Dodge Dakota
JOIN HERE
4/11/2002
13:51:35
| RE: 1.6 roller rockers
IP: Logged
Message:
With 1.6 ratios expect better lower throttle response and up to 6 rear wheel horsepower. 1.7 ratios can add up to 15 rear wheel horsepower to a stock Magnum.
I got that off of KRCperformance website.
|
YA
Dodge Dakota
JOIN HERE
4/13/2002
01:31:59
| RE: 1.6 roller rockers
IP: Logged
Message:
I run the Hughes Performance pedastel mount 1.6 rr's. 22,000 miles no problems. Not even a readjustment.
|
bernd
*GenIII*
4/13/2002
01:42:33
| RE: 1.6 roller rockers
IP: Logged
Message:
Ran the Crowers on mine for right about three years (30K+ miles)...adjusted once after the initial installation. Switching to Mopar 1.7's in a few more days. ;)
1997 Dodge Dakota SLT - V6
Supercharged/Intercooled @ 10# w/Nitrous
14.55 @ 96.01mph
|
Dakota Bob
GenII
4/13/2002
09:04:08
| RE: 1.6 roller rockers
IP: Logged
Message:
Will the 1.6 and 1.7 rockers fit on my 94 3.9? Do you need to buy new push rods if you install these? Which would be better Im going to keep the stock cam? Where is a good place to buy them from?
Bob
Cincinnati
94 CC 3.9 Jet chip stage 1 JBA Headers,19# fuel Injectors,Flow master 40s Split Fire Plugs K/N Chrome Filter 180 T Stat ,TPS adjustment,Flometrics throttle body Black Magic 150 JBA wires
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
