From | Message |
litlpunisher GenIII
![User Profile](http://www.dodgedakota.net/amb/icons/profile.gif)
![](http://www.dodgedakota.net/members/profiles/1115
/thumbnail.gif)
3/18/2002 08:32:49
|
Subject: head gaskets? IP: Logged
Message: Every one is talking about different head gasket to run. Those who have run 1008 say they blow. Those who are running them say there fine. For the longest time these were the best. Are the Mr gasket solicors better? Are these rol gaskets good or do they just fit the application. If any one is running solicor what is your luck and are you running high compression,blower, or nitrous. I would like to know before I put my 340 back together because i'll be running 11:1 compresion and spraying 200 shot of nitrous. Lets hear some feed back please
Thanks Kevin
98 Dakota Bottle fed 340ci
|
bernd *GenIII*
![User Profile](http://www.dodgedakota.net/amb/icons/profile.gif)
![](http://www.dodgedakota.net/members/profiles/1016
/thumbnail.gif)
3/18/2002 09:14:09
| RE: head gaskets? IP: Logged
Message: Here's the gaskets i'll be using:
http://www.rolmfg.com/
They're very high quality and they also have them specifically for the Magnum V6/V8.
The FelPro 1008's do work rather well but it depends on the installation....
(1) Were the heads decked before reinstallation (check for trueness)
(2) Were studs or bolts used
(3) Were the studs checked for lenghth (making sure they're not too long)
(4) Were the heads torqued down properly
1997 Dodge Dakota SLT - V6 Supercharged/Intercooled @ 10# w/Nitrous 14.55 @ 96.01mph
|
drtswinger Dodge Dakota JOIN HERE
3/18/2002 09:26:00
| RE: head gaskets? IP: Logged
Message: Yes I would like to know too. I am about to purchase either today or tommorow. My heads are off and waiting to be put back on. I need some feedback on the solicors.... because I want something with a reputation. As for the rol.... If your recommend them, and they are available to buy now... I wouldnt mind being a lab rat. I just want to drive my truck again. Also, who has the arp head bolts in stock, I cant seem to find anybody with them in stock.
|
litlpunisher GenIII
![User Profile](http://www.dodgedakota.net/amb/icons/profile.gif)
![](http://www.dodgedakota.net/members/profiles/1115
/thumbnail.gif)
3/18/2002 15:28:55
| RE: head gaskets? IP: Logged
Message: Bernd do you have any part numbers and gasket specs on the rol, (cc, bore, thickness) and do you know much about the solicor
98 Dakota Bottle fed 340ci
|
| P 1 |
|
Post a reply to this message:
Username Registration: Optional All visitors are allowed to post messages
|