| From | Message |
Patrick
R/T
 
3/27/2001
22:58:09
|
 Subject: Spindles
IP: Logged
Message:
I NEED 2 IN. DROP SPINDLES. ANY GOOD BAD OR SUGGESTIONS????
Patrick B.
|
lando981
Gen III
3/27/2001
23:18:53
| RE: Spindles
IP: Logged
Message:
You will be so impressed how the handeling changes I have the 3in western chassis and doetch racing shocks. It handels like a dream so smooth and crisp cornering. Plus the lowering of a truck in the right proportion gives it such a meaner stance.
Landon 97, 5.2 5spd, 3.90lim.slp.
|
dakota18indubs
Unregistered
3/28/2001
02:27:37
| RE: Spindles
IP: Logged
Message:
Go with the lower control arm. I did mine last week. 3in lower a-arm, or a 2inch coil, no spindle
Stevie P
2000 4.7 lowered on 18's
|
kota on 20s
Unregistered
3/28/2001
02:54:04
| RE: Spindles
IP: Logged
Message:
No one makes a spindle for the 97-01 dakota, because It will rub on the stock 15inch rim. You need to get the lower controll arm. I got mine from western chassis. They have a 2" dropped controll arm, and if you want to go lower get a 1-3" lowering spring. for a 5" total drop in the front. I think djm also has a 2" droped controll arm.
Eric
98 sport 5.2
dropped on 20s
|
kota on 20s
Unregistered
3/28/2001
03:03:59
| RE: Spindles
IP: Logged
Message:
18" dubs?? what the hell is an 18" dub? a dub is a 20. oh well whatever back to the question. No one makes a dropped spindle for a 97-01 dakota. you need a dropped lower control arm. western chassis makes a 2" one that works well and it comes with a lifetime warrenty. mix it with a lowered spring and you can drop the front up to 5" without 'bagging the truck. I think djm also has a control arm
Eric
98 sport 5.2 5speed
dropped on 20s (dubs)
|
Patrick
R/T
3/29/2001
20:56:17
| RE: Spindles
IP: Logged
Message:
Thanks you guys, I was told DJM makes dropped spindles, but I do like the idea of the A-arm. Where can I get Western from?
Patrick B.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
