| From | Message |
Dave
Dodge Dakota
JOIN HERE
1/25/2002
10:29:29
|
 Subject: Mopar PCM
IP: Logged
Message:
Is there any reason why mopar says not recomended for towing with the magnum pcm???
|
Neil
Dodge Dakota
JOIN HERE
1/25/2002
11:34:25
|  RE: Mopar PCM
IP: Logged
Message:
The PCM advances the timming. The increased load from towing may cause detonition.
|
Joseph
Dodge Dakota
JOIN HERE
1/25/2002
13:04:13
| RE: Mopar PCM
IP: Logged
Message:
I have a Mopar PCM in my 2500 Ram and I regularly tow up to 8000 lbs. I haven't had any problems with towing...just smiles. I run 89 or 93 and I have a 180 degree-stat.
|
Wayne
Dodge Dakota
JOIN HERE
1/26/2002
09:06:55
| RE: Mopar PCM
IP: Logged
Message:
Similar to Joseph, I am pulling over 3000# with my '99 Dakota. Performance PCM with 180 T-stat & 93 octane. No detonation.
|
Dave
Dodge Dakota
JOIN HERE
1/26/2002
09:24:02
| RE: Mopar PCM
IP: Logged
Message:
all I am pulling is 2 jet-ski's in the summer and 2 sleds in the winter. so this really shouldn't be a problem right
|
Joseph
Dodge Dakota
JOIN HERE
1/26/2002
14:28:39
| RE: Mopar PCM
IP: Logged
Message:
Correct...you should have no problem towing that. MAKE SURE YOU SWAP THE THERMOSTAT TO A 180 DEGREE ONE!!! I cannot say this enough. I ran mine with the stock 195 one and got detonation with 93 octane gas! Good luck!
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
