| From | Message |
Rob
Dodge Dakota
8/22/2001
17:21:32
|
 Subject: Intake and Torque?
IP: Logged
Message:
Will adding a airaid or home brew air intake add low end torque? if so how much on a 97 3.9L?
Thanks
|
Steve L
Dodge Dakota
8/23/2001
07:52:32
|  RE: Intake and Torque?
IP: Logged
Message:
Rob I have tried everything to gain low end torque on my 2000 3.9L V6. Airaid, Flowmetrics TB, Jet II, relocated IAT sensor, cap-rotor, and wires. Don't get me wrong they all have made a difference (still fighting the 18 over ticket!) but it all seems to be above 2500 rpm. The power really comes on at 3K. After talking to Bernd and checking out other posts I believe my next step will be 3.92 gears in the rear end. Have to see how much the ticket hurts first.
|
Jacob
Dodge Dakota
8/23/2001
12:59:34
| RE: Intake and Torque?
IP: Logged
Message:
Rob, did the jet stage II work good on your motor? I have heard they work crappy on the 5.2 and 5.9, work ok on the 4.7, but never heard a definate answer about the 3.9L.
Have you taken your truck to the track to see what is runs? Would like to compare yours to mine :)
|
dodge boyz
Dodge Dakota
9/04/2001
15:41:07
| RE: Intake and Torque?
IP: Logged
Message:
Rob, I have the airaid intake on my 2001 3.9 QC with flows. it works well, and I'm pretty confident that it added about 10 to 15ftlbs of torque, that is what the manufacture said it produced. Airaid is a good choice for the money, hope this helps.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
