| From | Message |
Python97
Dodge Dakota
8/21/2001
16:29:05
|
 Subject: mesh inserts
IP: Logged
Message:
Does anyone know where to get the mesh grill inserts that dont need to re-locate the hoods latch. You know the ones with the hole in the top corner. I got the 4.7 QC I dont kinow if that matters. Its a custom hood so I hope they will fit. The picture of my hood is in the album 5 top right corner silver dak.I think its basicly the same shape as the stock ones. Feedback is appreciated.
Thanks
|
Lesley
Dodge Dakota
8/21/2001
17:52:50
| RE: mesh inserts
IP: Logged
Message:
Check out Group Buys - Street Scene Grill Inserts.
|
Blizzard
Gen III
8/21/2001
18:58:23
| RE: mesh inserts
IP: Logged
Message:
Your factory grill attaches to the aftermarket hood, right? If so, you shouldn't have any problems with any of the aftermarket grills.
'01 QC 4x4
5.9L, 3.92 LSD, loaded
www.geocities.com/blizzzzard69
|
Python97
Dodge Dakota
8/22/2001
09:20:50
| RE: mesh inserts
IP: Logged
Message:
It does attach but not with screws it looks like it use rivets or mashed pieces of solder. How does eveyone elses attach?
|
Blizzard
Gen III
8/22/2001
10:27:27
| RE: mesh inserts
IP: Logged
Message:
Ahhhhh ... you mean the plastic factory grill inserts, eh? The little fins between the grill? Yeah, I took a pair of side cutters and just cut those little rivet things off. The speed grill attaches with metal clips. Holds the inserts in pretty tight.
OR you can just put the speed grill over the top of the plastic fins. They recommend you remove the fins and just run the speed grill (and I think you'd see the plastic fins behind the grill if you didn't remove 'em).
'01 QC 4x4
5.9L, 3.92 LSD, loaded
www.geocities.com/blizzzzard69
|
Python97
Dodge Dakota
8/22/2001
11:12:40
| RE: mesh inserts
IP: Logged
Message:
Thanks Blizzard thats exactly what I needed to know.
|
Blizzard
Gen III
8/22/2001
12:31:00
| RE: mesh inserts
IP: Logged
Message:
Yeah ... just clip those with a pair of side cutters, throw away the factory fins, and replace them with aftermaket inserts. That's all ya gotta do.
'01 QC 4x4
5.9L, 3.92 LSD, loaded
www.geocities.com/blizzzzard69
|
Blizzard
Gen III
8/22/2001
12:32:10
| RE: mesh inserts
IP: Logged
Message:
You betcha. Good luck Python
'01 QC 4x4
5.9L, 3.92 LSD, loaded
www.geocities.com/blizzzzard69
|
matt
Dodge Dakota
JOIN HERE
4/06/2002
20:46:05
| RE: mesh inserts
IP: Logged
Message:
how much do the mesh speed grills cost? i made some from some aluminized steel mesh gutter guards
that i got from canadian tire(in canada) for about
$18 for a package of 5 big pieces. they look identical to the street scene ones.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
