| From | Message |
Fed
GenII
 
11/19/2005
17:41:11
|
 Subject: RE: JUST RAN THE 1/4
IP: Logged
Message:
hahah u serious?? thats strange
'93 Dakota CC 3.9 auto
(4.10, LSD, magnaflow exhaust, K&N intake, lowered)
|
toolfan
GenIII
11/20/2005
11:50:07
|  RE: JUST RAN THE 1/4
IP: Logged
Message:
don't know if it works? i don't have the balls to turn my truck to the on position at 115mph to see if it works. ahhhhh!!!!:o
and some mods to slow it down!
|
my .02
Dodge Dakota
JOIN HERE
11/20/2005
21:23:42
| RE: JUST RAN THE 1/4
IP: Logged
Message:
if you turned the key to on, you'd probably blow the starter clean out of its mounts. My .02
|
T-racy1
Dodge Dakota
JOIN HERE
11/25/2005
00:50:56
| RE: JUST RAN THE 1/4
IP: Logged
Message:
How could you blow the starter? When the trans is in neutral the neutral saftey switch won't let the starter engage.
|
2003 4.7
Dodge Dakota
JOIN HERE
11/25/2005
01:56:43
| RE: JUST RAN THE 1/4
IP: Logged
Message:
Toolfan, I used to "bounce" my 318 off the rev limiter pretty often. Had a '95 RC with NV3500. Damn that truck was fun, but it could get interesting in the fifteen or so minutes of a fresh rain.
It lived for 314K, then the tranny and interior wireing decided to take a dump on me. Soo I've got a '03 RC 4.7 NV3500 now. The local joke here is that I traded a black V8 five speed, for a black V8 five speed. and I really have to say that I miss the 'ol 318. I've changed to the HO jeep cams, cleaned up the throttle body, ditched the 3.55 for 3.91, and put an Auburn in. And I still think my old '95 would have hung with or possibly even taken this one. I really think your on the right track with that truck. Good luck man!
P.S. I've not had the balls to turn my key to start at 117 ethier.:O (sreams OH $hit as flywheel is chewed into oblivion!)
|
2003 4.7
Dodge Dakota
JOIN HERE
11/25/2005
02:01:11
| RE: JUST RAN THE 1/4
IP: Logged
Message:
Oh yea, Graphitedak. I say A833 all the way. My buddy has a '72 340 four speed, and it will put a really big grin on your face. Or maby thats a little stiffy in your stiffer.
|
J2
Dodge Dakota
JOIN HERE
11/25/2005
02:15:26
| RE: JUST RAN THE 1/4
IP: Logged
Message:
Hey guys, about the shift points at 4500 and 5500 in an auto. what gives. my trck shifts at 4000 with the hypertech done to it. if there is a governer then let me know on how to remove it. thanks J2.
BTW lookin for a new tailgate for an 03 RT.
|
GraphiteDak
GenIII
11/25/2005
12:06:24
| RE: JUST RAN THE 1/4
IP: Logged
Message:
J2, you have a RT with is a mechanical controlled tranny. Superchips does NOTHING for shifting on those.
My electronic tranny in mine is controlled by the PCM 100%
2003 4.7, what tranny is that? A 4 speed manual???
Not sure if it would bolt to a 440 though...
|
toolfan
GenIII
11/25/2005
13:20:40
| RE: JUST RAN THE 1/4
IP: Logged
Message:
2003 4.7
my friend has a 318 rc with the NV3500. that is the funnest truck to drive. the stick is smooth and is easy to find the next gear. he has the 3.21 and he is still traction challenge in 3 gear.
i only wish i got the manual. yeah i thought the 318 would out run the 287. hehe
some trade
and some mods to slow it down!
|
DennisO
Dodge Dakota
JOIN HERE
11/25/2005
18:00:44
| RE: JUST RAN THE 1/4
IP: Logged
Message:
Hey graphite it is a 4-speed manual. It will bolt to a 440 just need a different bell housing.
I have a 1967 Coronet R/T 440 4-speed (A-833). I am currently restoring it. Oh yeah they are a badass transmission.
|
Idano
Dodge Dakota
JOIN HERE
11/26/2005
02:50:58
| RE: JUST RAN THE 1/4
IP: Logged
Message:
Graph,
The 833 is *the* 4 speed tranny. Mopar made a version for every engine they produced in the 60s-70s. Lakewood used to make bellhousings for using the mopar 833 on Chebby mouse and rat motors. An M-22 Muncie is a piece of junk waiting to blow-up compaired to an 833.
|
2003 4.7
Dodge Dakota
JOIN HERE
11/28/2005
01:31:02
| RE: JUST RAN THE 1/4
IP: Logged
Message:
Exactly. They're a little hard to shift when you've just rebuilt it and the linkage, shift detents aren't polished. But the're bulletproof, and fun. For the bigblock application they also made a hemi model. I know where one is in the trunk of an 71 challenger R/T. But It's way heavyer in weight than the normal case, and would be hard to carry the 100 or so yards in the dark to get it. ;p The bell is interchangeable from small to big block.
|
2003 4.7
Dodge Dakota
JOIN HERE
11/28/2005
01:41:36
| RE: JUST RAN THE 1/4
IP: Logged
Message:
Toolfan, If I was ahead of you when I caught third it was all over but the cryin. Yea it was some trade, I got $4500 for the '95. told 'em nothing was wrong but the interior harness, and they could'nt wait to get it. So I said cool, but when I got down on the 4.7 I knew it needed some work.
BTW we had the big doorslammer, pro-mod race at the local track. New track record was 4.24@153mph. 1/8th mile. It's only been re-opened for about a year though, and a strange track to run. There were JR. dragsters out running 7.55@100 or so, so my truck stayed in the parking lot where it belonged.
|
Kowalski
GenIII
11/28/2005
17:21:54
| RE: JUST RAN THE 1/4
IP: Logged
Message:
2003 4.7 - that bell is not interchangable from small to big block - they are different. Did you mean changable ? You'd have to swap the bell or use an adapter plate.
Lead, follow, or get out of the way
|
2003 4.7
Dodge Dakota
JOIN HERE
11/29/2005
00:39:51
| RE: JUST RAN THE 1/4
IP: Logged
Message:
Yea, sorry meant changeable.
|
BUCKWHEAT
Dodge Dakota
JOIN HERE
11/29/2005
02:36:13
| RE: JUST RAN THE 1/4
IP: Logged
Message:
2003 4.7, do you think were that stupid, you said at trade for the 95 reg cab you got 4500.00 with 314,000 mile on it? how much was the 2003? $55,000.00 get real. you would be lucky to have gotten 450.00
|
2003 4.7
Dodge Dakota
JOIN HERE
11/30/2005
23:56:25
| RE: JUST RAN THE 1/4
IP: Logged
Message:
Het buckwad Did you trade it in? NO! So how can you say what I got on trade? I got exactly what I said. I was expecting somewhere around 1,000$ or less.
I really wish people like you could keep you smartass remarks to themselves.
BTW total payoff for loaded '03 $ 22,353.00
|
BUCKWHEAT
Dodge Dakota
JOIN HERE
12/01/2005
00:51:32
| RE: JUST RAN THE 1/4
IP: Logged
Message:
Did the dealer grease you up first? an 03 reg. cab for $22,353.00 that truck was not 23,000 brand new. you basically paid 4000.00 for them to take your pos. did you walk on the lot with a stupid sign on your forehead or what?
|
2003 4.7
Dodge Dakota
JOIN HERE
12/07/2005
01:31:29
| RE: JUST RAN THE 1/4
IP: Logged
Message:
Hey buckwad, I refuse to have a battle of wits with an unarmed person.
If you think you could have gotten a LOADED high back bucket V8 RC DAK for less that 22K total payoff in '03 with 2 miles on it. I'd like to see it.
|
BUCKWHEAT
Dodge Dakota
JOIN HERE
12/08/2005
00:56:15
| RE: JUST RAN THE 1/4
IP: Logged
Message:
Just let me know when you decide to trade again, have I got a deal for you. dude my 2002 v8 extended cab, was only 19,995 brand new, well, almost, it did have 310 miles on it from a salesman. as for battle of "wits". you showed you have none already..merry christmas, enjoy.
|
| | <<Previous Page P 2 Next Page>> |
