Dodge Dakota ForumDodge Dakota PhotosDodgeDakota.net Membership
  Forums   Forum Tools
08:24:06 - 11/17/2024

Dakota Performance
FromMessage
texanjohn
Dodge Dakota
JOIN HERE
 Email

3/27/2005
16:19:53

Subject: Need Help
IP: Logged

Message:
Posted this in V8 forum as well. Not for sure which one it belongs in.

I bought a used 99 Dakota R/T. It has a Powerdyne on it. I have a couple of questions.

First, there is an outlet on the cover that fits over the carb. It seems like there should either be a plug or a hose hooked up to it. I don't see any disconnected hoses. Should it be plugged? Should there be a hose connected? I believe the prior owner also upgraded to an M1(?) intake. I can email or post a pic, but there is simply a little stub coming off the plastic hat sitting on top of the carb. It is pointing towards the windshield and definitely looks like it supposed to be either plugged or have a hose connected.

Second, I replaced the power steering pressure line several months ago. That may have been a mistake as it appears that the reservoir or entire power steering pump is bad. Is this common? It looks fairly easy to replace, and I picked up one from Autozone. Just looking for any advice/tips.




texanjohn
Dodge Dakota
JOIN HERE
 Email

3/27/2005
16:22:15

RE: Need Help
IP: Logged

Message:
Pics can be seen here:

http://www.ls2gearchatter.com/test/Pic1.JPG

http://www.ls2gearchatter.com/test/Pic2.JPG




slow2dak
Dodge Dakota
JOIN HERE
 Email

3/27/2005
17:22:48

RE: Need Help
IP: Logged

Message:
that fitting that is on the airhat is the breather hose that is supposed to be connected to the valve cover. is there an open connection on the left valve cover? hope this helps..



texanjohn
Dodge Dakota
JOIN HERE
 Email

3/28/2005
20:35:59

RE: Need Help
IP: Logged

Message:
Thanks. I realize I inappropriately called the TB a carb. It is just so much more carb looking than my vette TB. I had even pulled some of the injectors to inspect them!

I do have a Powerdyne, so I assume I would not want the valve cover breather line hooked up to that as it would be getting pressurized as opposed to having a vaccum?

I did get the PS pump replaced, and all is good there.



   P 1


Post a reply to this message:

Username Registration: Optional
All visitors are allowed to post messages


Name:
Email:
Notify me when I get a reply to my message:Yes  No

Icons:            

          

Subject:
Message:
 



Home | Forums | Members | Pictures | Contact Us

This site is in no way affiliated with Chrysler or any of its subsidiaries.