| From | Message |
jasonsdakota
Dodge Dakota
JOIN HERE
11/19/2004
15:16:03
|
 Subject: throttle body tip
IP: Logged
Message:
i need advice. i have a 2000 4.7 dakota with 65 mm throttle body. should i get a stock 68mm which is for sale, or go all the way and get a true 68. does my dakota need more than stock 68. some people must think so cause people upgrade them all the time and mine is even smaller. what should i do. also need intake manifold advice but i'll probably do that last if the t.b. is the bigger restriction.
|
HSKR
Dodge Dakota
JOIN HERE
11/19/2004
15:30:28
| RE: throttle body tip
IP: Logged
Message:
Go F&B and you will have no problems. As far as intake manifold, I've heard from several people that the HO intake manifold really doesn't gain you anything worthwile unless you also do the cams, and exhaust, and even then it's minimal for the money and time involved.
|
jasonsdakota
Dodge Dakota
JOIN HERE
11/19/2004
15:42:09
| RE: throttle body tip
IP: Logged
Message:
hskr, i have the cams. great mod by the way.
do these people that didn't really benefit by any chance already have the 03/04 manifold? i really need some more rpm power
|
N56629
Dodge Dakota
JOIN HERE
11/19/2004
15:47:18
| RE: throttle body tip
IP: Logged
Message:
"i need advice. i have a 2000 4.7 dakota with 65 mm throttle body. should i get a stock 68mm which is for sale, or go all the way and get a true 68. does my dakota need more than stock 68."
If you want a "true 68mm," why not just have your 65mm modified to 68mm? If the one that's for sale is really a good deal, you could buy it, have it modded and no down time.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
