| From | Message |
R/TOWNER
Dodge Dakota
JOIN HERE
11/15/2004
18:08:40
|
 Subject: PERFORMANCE PCM
IP: Logged
Message:
I talked to a guy dodge that said he could order me a perf. pcm for my 01 r/t for $373.00 is it worth buying or should i get a hypertec.
|
prple-gaseatr
Dodge Dakota
JOIN HERE
11/15/2004
18:20:48
| RE: PERFORMANCE PCM
IP: Logged
Message:
what kind of pcm is it?
|
R/TOWNER
Dodge Dakota
JOIN HERE
11/15/2004
18:52:49
| RE: PERFORMANCE PCM
IP: Logged
Message:
Its a mopar comp.
|
fastyz400
Dodge Dakota
JOIN HERE
11/15/2004
19:20:21
| RE: PERFORMANCE PCM
IP: Logged
Message:
depends what your after.
hypertech III allows 87 or 93 octane fuel. I just installed mine. Seat of the pants. It does make a difference. However, i have the following mods already. 180 thermostat, msd ignition, accell coil, msd wires, cold air intake, flowmaster exhaust.
I think with all those mods and the hypertec does make a difference.
From all the threads i have read about non-of the other tuners does anything except for the mopar pcm. I'd have to disagree. Don't have a dyno to confirm but there is diffinetly a seat of the pants difference.
Drove it full throtle before the program. Remembered the take off and mid-throtle torqe feel. Then did the 87 octane program. Yes, there is a difference. Pulls a lot harder.
You may not get the additional performance, if the intake and exhaust are not opened up.
Just my 2 cents.
|
R/TOWNER
Dodge Dakota
JOIN HERE
11/15/2004
19:28:18
| RE: PERFORMANCE PCM
IP: Logged
Message:
The guy at dodge told me when i install the comp. i will have to run 91 octane or higher. I have K&N cold air intake msd & catback. mallory wires 8mm. brass cap & rotor.
|
Lew360
Dodge Dakota
JOIN HERE
11/15/2004
20:00:39
| RE: PERFORMANCE PCM
IP: Logged
Message:
I wasn't aware they made a Mopar PCM for the '01. I have never seen on for the '01 only '92-'00. Mancini racing is where I got mine they list it a $329. So if it is real then you can find a better deal.
RC R/T, PPH headers, Flowmaster 50, No Cat, MSD 6a, BTM, IAT adjuster, Powerdyne Supercharger, M-1 4/2, Mopar PCM
|
prple-gaseatr
Dodge Dakota
JOIN HERE
11/15/2004
23:45:03
| RE: PERFORMANCE PCM
IP: Logged
Message:
yeah, mopar doesnt make one for an 01, my buddy allready tried to find one for his and they dont make it. it must be for a custom flash then or something else
|
fastyz400
Dodge Dakota
JOIN HERE
11/16/2004
01:16:51
| RE: PERFORMANCE PCM
IP: Logged
Message:
R/TOWNER
Read up on the Hypertech III programer. I know with all the others, you have to go with premium fuel. Which is kinda expensive now days. The hypertech allows me to switch from regular fuel program or premium fuel program.
I like this feature, because, it won't break the bank.
|
R/TOWNER
Dodge Dakota
JOIN HERE
11/16/2004
19:44:46
| RE: PERFORMANCE PCM
IP: Logged
Message:
Thanks for the replies its helped alot ,but as far as not making 1 for 01 i have asked several times if he was sure this was a performance pcm that would change my shift points and revlimiter and topend shutoff and he said yes! and kind of got ill with me for calling so many times.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
