From | Message |
Hoe Dodge Dakota JOIN HERE
3/27/2002 21:37:29
|
Subject: tommorrow is the big day!! IP: Logged
Message: Well tommorrow i finnally will have my performance accessories 2" body lift installed i've had it for about a month and my brother in law and i are finnally putting it on so i'm excited about that..... my truck is a 95 4x4 with a 5.2L and i'm wanting to run 32X11.5X15 adn i already have american racing rims and i dont know what the backspacing is on them but do you think the 32's will fit cause currentyl it has 235 75 15's on it and they look to small for my truck. I jus twish my torsion bars were stronger cause they are cranked all the way and the front is still about an inch lower than the rear........i jsut hope the lift will make it look better cause i've put some of the lund hood scoops on it so it looks meaner so maybe the lift will make it even more meaner..
|
Brent88 Dodge Dakota JOIN HERE
3/27/2002 23:01:25
| RE: tommorrow is the big day!! IP: Logged
Message: hey send some pics my way! i was thinkin of doin that same setup ( except with a 3" body) and i want to see what it looks like. thanks...later
Brent robertsgroup@narrows.com
|
Super Bee Dodge Dakota JOIN HERE
3/29/2002 02:41:34
| RE: tommorrow is the big day!! IP: Logged
Message: hell those size tires look small on my truck and i have no lift at all
|
dgepwr Dodge Dakota JOIN HERE
3/29/2002 20:25:49
| RE: tommorrow is the big day!! IP: Logged
Message: I have a 87 dakota 4x4 with 32's on it with no body lift. Just cranked up the torsion bars. I t rubs a little, but only when you turn sharp and hit a good bump. The 2" body lift should be more than enough to keep the tires off the fender.
|
Super Bee Dodge Dakota JOIN HERE
3/30/2002 01:14:17
| RE: tommorrow is the big day!! IP: Logged
Message: crippes my torsion bars are all the way up too
how far does your lowest point on the front (the skip plate over the front diff)sit off the ground?
|
| P 1 |
|
Post a reply to this message:
Username Registration: Optional All visitors are allowed to post messages
|