| From | Message |
Hicap33
Dodge Dakota
JOIN HERE
3/26/2002
18:22:54
|
 Subject: 275/70R16
IP: Logged
Message:
Hey guys, I have a 2000 QC with 16 inch rims. I'm needing some info if you all can help. 265/75R16 are tall and skinny. Overall height is 31.8 in. 275/70R16's are 31.3 tall and 11 in wide. Does anyone know if they will fit without rubbing. My torsion bars are raise a little so the truck sits level. Any help would be nice before I order these, thanks
|
Blizzard
*GenIII*
3/26/2002
18:45:22
| RE: 275/70R16
IP: Logged
Message:
Yep, I ran that size in a BFG A/T before my body lift. Rubbed a bit on the inside corner of the bumper but only when I was aired down for the sand. Prolly wouldn't rub at all with torsion bars adjusted.
'01 QC 4x4
5.9L, 3.92 LSD, loaded
|
Hawkeye
*GenIII*
3/26/2002
19:06:31
|  RE: 275/70R16
IP: Logged
Message:
For what its worth, the 2000's didnt have 16 inch rims. 16 inch rims started on the 2001's.
|
ole
GenIII
3/26/2002
23:31:20
| RE: 275/70R16
IP: Logged
Message:
I've got 275/75R16 Pirelli Scorpions
They fit just fine, never rub under any conditions
(Torsion bars were set one inch low from the factory, I cranked them up till they were in
spec per the factory shop manual)
|
ole
GenIII
3/26/2002
23:32:42
| RE: 275/70R16
IP: Logged
Message:
doh !
I meant 265/75R16
|
Hicap33
Dodge Dakota
JOIN HERE
3/27/2002
12:15:22
| RE: 275/70R16
IP: Logged
Message:
Hey Hawkeye, I know. Mine came with 15's, but I have a set of almost new 16 in. rims that are going on.
Thanks for the help people..
|
Hawkeye
*GenIII*
3/27/2002
20:03:25
| RE: 275/70R16
IP: Logged
Message:
Just wanted to make sure.
|
shak
Dodge Dakota
JOIN HERE
9/14/2002
17:18:02
|  RE: 275/75R16
IP: Logged
Message:
could anyboby tell me the best 275/75R16 tire
and
the dimentions of the 285/70R16 dunlop radial rover tire
thanx
|
97_blk_dak
GenIII
9/15/2002
13:07:23
| RE: 275/70R16
IP: Logged
Message:
285/70/16
diameter = 31.7"
width = 11.2"
This website will convert metric tire sizes for you.
http://www.s-series.org/htm/calc/tiresizeconv.htm
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
