| From | Message |
§Mud Runner§
GenII
 
2/27/2002
20:05:16
|
 Subject: Help with Tires Please!?!?
IP: Logged
Message:
How's it goin people? I have a little delima that hopefully someone has some experience with. My Dak currentyl has 30x9.50x15 BFG A/T's on it right now, but they are getting pretty close to Mickey Thompson Street E/T's. I am saving up right now for my lift(s), but will need new tires before I can afford them. So, my question is: Can I fit 31x10.50's or possible 32x11.50's on my stock ride without any rubbing??? I'm pretty sure I can't fit the 32's but has anyone tried 31's????
I appreciate all help in advance.
Thanx
95 Dakota 4x4 5.2L SLT A/T LSD
K&N Drop-In
FlowTech Headers
MagnaFlo Hi-Flo Cat
Two Chamber Flows
TransGo Shift Kit
3923's
Accel Cap & Rotor
|
Dave
Dodge Dakota
JOIN HERE
2/27/2002
21:41:30
|  RE: Help with Tires Please!?!?
IP: Logged
Message:
the sports come stock with 31x1050 15's
|
andrew
Dodge Dakota
JOIN HERE
2/28/2002
00:11:45
| RE: Help with Tires Please!?!?
IP: Logged
Message:
I have a 93' 4x4 dakota at stock heigth and run 31x10.5 pro comp a/t's with a ton of room to spare. I bet I could run 32's with no rubbing at all. By the way, how do you like your flowtechs? ya got a part#?
|
§mud runner§
GenII
2/28/2002
10:33:12
| RE: Help with Tires Please!?!?
IP: Logged
Message:
cool, I think I'll crank up my torsion bars and try some 32's.... Cross your fingers for me :-\.
Andrew, I love the FlowTechs, I noticed incredible lower torque improvements right off the bat. I'll have to look in a Summit catalog for the part number, but they are the "Summit Brand" headers for $159. FlowTech makes them, then Summit sells them, they even have the FlowTech badge on the driver's side header. I was pretty surprised when I opened the box. Just for note, If you order them, you need to goto DC to get the EGR tube gasket(about 3 bucks), it doesn't have one with it, but it does include all bolts and header gaskets.
95 Dakota 4x4 5.2L SLT A/T LSD
K&N Drop-In
FlowTech Headers
MagnaFlo Hi-Flo Cat
Two Chamber Flows
TransGo Shift Kit
3923's
Accel Cap & Rotor
|
andrew
Dodge Dakota
JOIN HERE
2/28/2002
11:17:34
| RE: Help with Tires Please!?!?
IP: Logged
Message:
That is great news. Did they just bolt right in or did you have to do any fabricating the stock y-pipe? Any leaks?
|
andrew
Dodge Dakota
JOIN HERE
2/28/2002
12:10:39
| RE: Help with Tires Please!?!?
IP: Logged
Message:
they are the summit truck headers right?
|
§Mud Runner§
GenII
2/28/2002
17:45:33
| RE: Help with Tires Please!?!?
IP: Logged
Message:
Yeah they are the Summit Truck Headers, if you call them and talk to them they only have one set of Summit brand headers for gen II daks. I just tried to get their part number but their site is down apparently. They were completely bolt on. I had to do no modifying at all. I did have two exhaust leaks right off the bat, but one was the EGR tube (the gasket is not supplied you need to get from a dealership around 3 bucks) and a small one on the passenger side manifold. I got the EGR gasket and that took care of that one, then loosened the header bolts and re-torqued them like I should have the first time :-\ and now they're just fine. You should get them, they are a great buy, and I have no complaints whatsoever.
Anthony
95 Dakota 4x4 5.2L SLT A/T LSD
K&N Drop-In
FlowTech Headers
MagnaFlo Hi-Flo Cat
Two Chamber Flows
TransGo Shift Kit
3923's
Accel Cap & Rotor
|
andrew
Dodge Dakota
JOIN HERE
2/28/2002
21:05:19
| RE: Help with Tires Please!?!?
IP: Logged
Message:
what did they do as far as performance? Did they do anything for sound?
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
