| From | Message |
nathan Evans
Dodge Dakota
JOIN HERE
2/04/2002
18:54:34
|
 Subject: 30's and 31's
IP: Logged
Message:
I have a 90 Dakota 2wd and want to put 30 a/t's on the front and 31 m/t's on the rear will i need a body lift?? thanks
|
Super Bee
Dodge Dakota
JOIN HERE
2/05/2002
03:08:13
| RE: 30's and 31's
IP: Logged
Message:
well on my 90 dakota i was looking and 30s on the front might barely fit.....there might be some minor rubbing problems
maybe
|
Joe E.
Dodge Dakota
JOIN HERE
2/05/2002
21:08:54
| RE: 30's and 31's
IP: Logged
Message:
Ok yall, what gives? I have a 1990 Dak 2wd. I a into the big tire thing too. I have a 2in suspension lift and a 3in body lift and can run only 31x10.50s. My wheel offset is larger than stock but what the heck? I couls fit 35s on the rear easily, but the front is a pain in the Ars. Any help?
Joe E.
|
2THEXTRM
GenIII
2/05/2002
23:33:45
| RE: 30's and 31's
IP: Logged
Message:
Bushwacker Cut-out Fender Flares will fix your problem of fender opening being to small in front and they don't look half bad either. If your not afraid of trimming some sheet metal they are worth the $250 , you could probably run 33's with the 5" of lift Joe.
Flowmaster cat back, Air Raid CAD and homemade TB connect, Poweraid TB Spacer, Splitfire Plugs
3 inch body and 1.5 Block Lift, 33x11.50-16's
|
Super bee
Dodge Dakota
JOIN HERE
2/06/2002
01:52:05
| RE: 30's and 31's
IP: Logged
Message:
yeah thats where ei would run into problems
i currently have stock fender plares and could prolly cover up some fender hacking with that
but i dont want to try until i know
|
Joe E.
Dodge Dakota
JOIN HERE
2/06/2002
23:57:33
| RE: 30's and 31's
IP: Logged
Message:
What do you mean Cut out flairs? Are they bigger than regualr Bush wacker extend-a-fenders? I have those now. And they have covered up about 3-4ins of hacken. Just did that yesterday. Well had some gone before but now I really got into it. Where can I look at these fenders? I am raising the rear 2in more inches so that will help me a bit. My main goal is to run 33x12.50s but now I am looken for 31x12.50s. Expensive lil basterds too. Like $160 for a BFG 31x12.50x15! Gotta find some on ebay or something. Thanks guys.
Joe E.
|
2THEXTRM
GenIII
2/07/2002
07:45:19
| RE: 30's and 31's
IP: Logged
Message:
Sorry Joe, I just checked out www.bushwacker.com and they only show the extenda flares for 87-96 Dakotas. You might want to call them to be sure, websites are always updated as products are available.
Flowmaster cat back, Air Raid CAD and homemade TB connect, Poweraid TB Spacer, Splitfire Plugs
3 inch body and 1.5 Block Lift, 33x11.50-16's
|
Joe E.
Dodge Dakota
JOIN HERE
2/08/2002
10:13:35
| RE: 30's and 31's
IP: Logged
Message:
Hey man thanks for your effort. Are the cut out flairs the ones with the rivets showing along the top of the flair? The ones you see on stock Nissan Frontiers? So you do what; basically cut out your fender until you get to the spot where the flair will cuver up the bare metal? Thanks for the help. hope you understand what I am saying, I have a meeting in a few min. and dont have time to reread. Thanks
Joe E.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
