| From | Message |
CANTONDAK
Dodge Dakota
JOIN HERE
1/14/2002
16:48:35
|
 Subject: BACK SPACING QUESTION ?
IP: Logged
Message:
HAVE STOCK 2000 CC 4X4. GOING TO PUT BFG 32X11.50'S ON IT WITH EAGLE ALLOY #149 RIMS. (2" BODY LIFT DOWN THE ROAD) QUESTION IS ... THE STOCK 15X8 RIMS HAVE 5" BACK SPACING, THE EAGLES HAVE 3-3/4". ANY PROBLEMS ANYBODY KNOWS ABOUT ?
MORE/LESS BACK SPACING HELP/HURT WITH RUB ?
|
RESQready
GenIII
1/14/2002
17:56:21
|  RE: BACK SPACING QUESTION ?
IP: Logged
Message:
I have a set of Alcoa wheels with 3 3/4" backspacing and 32x11.5 BFG MT's -- there WILL be some rubbing. To help alleviate that problem, I cut about 1.5" off the front, lower valance and trimmed the black plastic fender liner both at the front of the wheel well and at the rear. Now I only have minor rubbing on the passenger side at the back of the wheel well when steering hard to the right -- nothing that will cause damage.
Derek Jensen
2000 QC 4x4
RESQready Dakota
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
