| From | Message |
Opie
Dodge Dakota
1/06/2002
16:17:18
|
 Subject: Bolt pattern and backspacing.
IP: Logged
Message:
What is the bolt pattern on the 00 quad cabs,is it 6 on 4.5 or something else? I have been looking for a set of AR-767 on hte American Racing website and I can't seem to find the proper bolt pattern, also is the correct backspacing 3.75? any help will be greatly appreciated.
|
Hero
Dodge Dakota
1/06/2002
17:43:03
|  RE: Bolt pattern and backspacing.
IP: Logged
Message:
Hiya Opie,
Heh, my Drill Instructors at Paris Island used to call me that. :)
As far as the bolt pattern on a '00, I think it is 6 on 4.5. At least that is what it is on the '98's, and I dont think they changed it.
Hero
|
SteveAZ
Dodge Dakota
1/06/2002
17:45:15
| RE: Bolt pattern and backspacing.
IP: Logged
Message:
Yes, the bolt pattern is 6 on 4.5. I also believe the stock backspacing is 3.75. When I was looking for wheels you were pretty limited with the bolt pattern and really limited if you are staying with the stock backspacing.
Steve
|
Opie
Dodge Dakota
1/06/2002
20:57:28
|  RE: Bolt pattern and backspacing.
IP: Logged
Message:
Thanks for the info, also has anyone installed the AR-767 on a dakota? If so did you use the stock backspacing, or did you have to change it.
|
DACOADA
Dodge Dakota
1/07/2002
20:01:26
| RE: Bolt pattern and backspacing.
IP: Logged
Message:
I use 3.25" backspacing on my 2000 dak. I have 33's on it. They are the A/E 589's. 6x4.5.
Corey
|
CANTONDAK
Dodge Dakota
JOIN HERE
1/17/2002
13:47:43
| RE: Bolt pattern and backspacing.
IP: Logged
Message:
THE STANDARD 2000 15"X8" DAK RIMS ARE 6 ON 4.50". THE FACTORY BACK SPACING IS 5.50". HAVE TO BE CAREFUL, THE SMALLER THE BACK SPACING THE MORE "RUB" PROBLEMS ARE CREATED. WHEN TURNING, THE SMALLER BACK SPACING PUSHES THE TIRE OUT INTO THE FENDER WELL.
|
Brad1599
Dodge Dakota
JOIN HERE
6/26/2002
01:22:43
| RE: Bolt pattern and backspacing.
IP: Logged
Message:
Does anybody know if a 15X8 inch rim with 3-3/4" back spacing will fit a 2001 Dakota 2wd. With either 245 or 255/60R15s. ALso how much would it stick out the fender and would it rub any.
|
Junior Bodine
Dodge Dakota
JOIN HERE
11/30/2002
09:30:18
|  RE: Bolt pattern and backspacing.
IP: Logged
Message:
My 99 Dakota has 235/15 on the factory wheels, and there is so much open space in the wheel wells that it looks like I could fit ANY sane tire/wheel combo in there. I wouldnt think the combo you mentioned would stick out at all.
I have some 295/15 Wranglers on 15" wheels from a Bronco II that I plan to put on. Looks like there should be plenty of room. Havent checked the backspacing though.
|
shandy erisma
Dodge Dakota
JOIN HERE
7/08/2003
23:42:52
| RE: Bolt pattern and backspacing.
IP: Logged
Message:
is that 6/4.5 the same for both 2 and 4 wheel drive
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
