From | Message |
Joe L. Dodge Dakota
12/29/2001 14:25:06
|
Subject: 33x10.50 w/ 2'' body lift? IP: Logged
Message: Does anyone know if 33x10.50 BFG A/Ts will rub on a '99 5.2 4x4 ext.cab w/ a 2" body lift?
|
4wDakota GenIII
12/31/2001 09:08:22
| RE: 33x10.50 w/ 2'' body lift? IP: Logged
Message: I have been told they won't rub with no lift at all. Check out my webpage. The green truck in the top left has 33 x 10.50's and no lift.
http://www.geocities.com/cjf7148/tires.html
I'm sure you can do it easily with a 2" body lift.
Corey
98 CC 4x4, 5.2 Auto 3.55LSD
|
Tony Dodge Dakota
1/01/2002 18:47:09
| RE: 33x10.50 w/ 2'' body lift? IP: Logged
Message: i have one with a 3" and 33 and they rub at full turn each way
|
durtydog GenIII
1/12/2002 11:06:24
| RE: 33x10.50 w/ 2'' body lift? IP: Logged
Message: hey tony are they the 10.50 or the 12.50?
98 club cab sport 5.2
|
Tony Dodge Dakota JOIN HERE
1/28/2002 23:08:39
| RE: 33x10.50 w/ 2'' body lift? IP: Logged
Message: 10.5 they are the super swamers 33x10.5x15
|
STACY Dodge Dakota JOIN HERE
2/03/2005 12:22:57
| RE: 33x10.50 w/ 2'' body lift? IP: Logged
Message: NOT SURE IF THE 33X10.5X15 WILL FIT OR NOT BUT I
WOULD ALSO LIKE TO KNOW I AM PUTTING A 3" LIFT ON
A 99 DURANGO AND WANT THE SAME SIZE TIRES.
|
Eric Dodge Dakota JOIN HERE
2/05/2005 22:10:03
| RE: 33x10.50 w/ 2'' body lift? IP: Logged
Message: I had 33x10.5" thornbirds on my truck with just crankin up the torsion bars. Mostly just rubed on the frame at full turn. But it will rub there with a bodylift anyway. I have a 3" rancho lift now and am planning to put a 2" bodylift so I can turn down my torsion bars for better frontend travel when I wheel. Now I have 33x12.5"s and it definatly looks and wheels better. Hope this helps
|
cstmgsxr Dodge Dakota JOIN HERE
2/17/2005 18:49:05
| RE: 33x10.50 w/ 2'' body lift? IP: Logged
Message: 4wDakota...
what tires are on the black QC (tp right) and is there a lift on it?
|
HSFD728 Dodge Dakota JOIN HERE
2/18/2005 21:57:29
| RE: 33x10.50 w/ 2'' body lift? IP: Logged
Message: Ive got 32x11.50 MTRs they rub some at full turns but ive got no lift.I dont think id go any bigger without some lift though.
|
ParkCityDak Dodge Dakota JOIN HERE
3/09/2005 12:37:52
| RE: 33x10.50 w/ 2'' body lift? IP: Logged
Message: I have 33x12.50s with no body lift and 2 inch torsion bar crank and minor trimming. Minimal rubbing only when going too fast into drainage ditches (Utah has them in from of every parking lot EVERYWHERE!). I'm running Bridgeston Duelers on stock rims...
|
tdak Dodge Dakota JOIN HERE
3/09/2005 20:16:13
| RE: 33x10.50 w/ 2'' body lift? IP: Logged
Message: will the 33's fit on an 04 QC with no lift?
|
jimmy Dodge Dakota JOIN HERE
3/14/2005 18:22:28
| RE: 33x10.50 w/ 2'' body lift? IP: Logged
Message: tdak:
i was faced with the exact situation and it works fine; no rubbing at all! my local body shop told me they would not fit, trying to charge me extra for shaving the fender wells. but i bought the 33s anyway and installed them myself, it works and looks great.
|
| P 1 |
|
Post a reply to this message:
Username Registration: Optional All visitors are allowed to post messages
|