Dodge Dakota ForumDodge Dakota PhotosDodgeDakota.net Membership
  Forums   Forum Tools
23:52:12 - 12/19/2024

Off Road
FromMessage
MADakota
Dodge Dakota
JOIN HERE
 Email

9/20/2010
15:35:56

Subject: Back Spacing
IP: Logged

Message:
Ok im trying to find out what back spacing i need to get on my wheels im gonna buy, pro comp 98 series rock crawlers.

I have a 1998 dodge dakota with a 5 in body lift
im putting the wheels on 33X12,50 tsl thornbirds

I was thinking of getting 3 and 3/4 back spacing but im not sure, im want to avoid cutting my fender or anything else as much as possible



other bill
Dodge Dakota
JOIN HERE
 Email

9/21/2010
15:55:45

RE: Back Spacing
IP: Logged

Message:
MADakota,

If you actually have 5 inches of body lift (2" spacers on top of 3" spacers?) you trully are MAD. I don't believe any state allows a body lift over 3"s...none allow stacking. Should you get into an accident and someone gets hurt, even if it's not your fault(!) you could be liable.

Now, if you mis-typed and have a suspension lift and body lift, you are probably okay. With that said, the further the tire/ wheel combo sticks out (equals less back-spacing) the more likely you will have rubbing issues at the lower rear portion of the fender when turning or stuffing a wheel when off road. I'm not positive, but I think your stock back-spacing is 5.5"s. So along with the increased tire width, you will be moving the tire edge out an additional 1.25"s with your new rims. With 5"s of lift (regardless of how you got it) and your proposed wheels I would guess you may not see too much rubbing on the street, but you may experience a bit off road.

...then again I may be corrected by a Gen III owner in the next few minutes!



MADakota
Dodge Dakota
JOIN HERE


9/25/2010
11:08:53

RE: Back Spacing
IP: Logged

Message:
so 4"s of backspacing would be fine?



Bucket
GenII
 User Profile


9/26/2010
01:43:48

RE: Back Spacing
IP: Logged

Message:
Otherbill is correct I have 4" suspension
and 3" body lift and 3 3/4 backspacing
and my 94 still rubbed exactly where
otherbill said it would. my tires are
32x11.5 but a gen 3 does have bigger
wheel wells. I still think you will rub with
just a body lift.



MADakota
Dodge Dakota
JOIN HERE


10/01/2010
10:31:19

RE: Back Spacing
IP: Logged

Message:
still dont have an answer, what back spacing should i get on my
wheels?



other bill
Dodge Dakota
JOIN HERE
 Email

10/03/2010
21:21:32

RE: Back Spacing
IP: Logged

Message:
You would do best by staying with something about a 4" backspacing and an 8" wide rim.



MADakota
Dodge Dakota
JOIN HERE


10/05/2010
19:32:29

RE: Back Spacing
IP: Logged

Message:
im just worried about rubbing on the front fender and inside the
wheel well, is 3 3/4 too much?



   P 1


Post a reply to this message:

Username Registration: Optional
All visitors are allowed to post messages


Name:
Email:
Notify me when I get a reply to my message:Yes  No

Icons:            

          

Subject:
Message:
 



Home | Forums | Members | Pictures | Contact Us

This site is in no way affiliated with Chrysler or any of its subsidiaries.