| From | Message |
Taylor
Dodge Dakota
JOIN HERE
3/28/2009
17:52:01
|
 Subject: Suspension lift
IP: Logged
Message:
I want to get a suspension lift for my 02 4x4 v8 dak
And I was looking to see what type is the best out there. Any
information would be great
|
Leo72987
Dodge Dakota
JOIN HERE
4/06/2009
15:15:59
|  RE: Suspension lift
IP: Logged
Message:
You have a few options rancho makes a 3 inch suspension lift but its pricey like $1500 and more if shocks arent included. You could get a 3 inch body lift from performance accesories for like $280. both will make room for 33 however some trimming might be required or you could adjust your torsion bars a little. Another option which is the one i took and works great for me is cranked the bars around 2 inchs up front and installed 2.5 inch blocks from procomp in the back. I then installed shocks from the rancho 3 inch lift kit to perserve my rear flex, didnt want the stupid shocks to act like bump stops. I am also running LT265/75/R16 medalist mud kings on the stock rims they come to a 32 inch diameter, mud terrians are more true with there diameters. If you do it my way keep in mind the front will be more firm up front. Good luck !
|
SxtJDK03
GenIII
4/07/2009
10:44:15
| RE: Suspension lift
IP: Logged
Message:
Or you can do what Im doing and take a grinder and plasma cutter to all that torsion bar stuff! Put a dana 44 under the front, have way more flex and a stronger front end!
Wheel 'til it breaks!
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
