| From | Message |
pratt
Unregistered
3/13/2001
21:00:45
|
 Subject: Rancho 3" lifts
IP: Logged
Message:
Anyone know where I can see a Dakota W/a Rancho 3"
suspension lift other than the rancho web site?
|
Jamie
Dodge Dakota
JOIN HERE
5/08/2004
14:03:37
| RE: Rancho 3
IP: Logged
Message:
How do i add 3 more inches to my 3 inch rancho lift i all ready have on my truck. Plus i have a 4 inch body lift so that makes it 7 inchs i want ten. How can i do this??
|
Donkey
Dodge Dakota
JOIN HERE
5/09/2004
02:01:06
| RE: Rancho 3
IP: Logged
Message:
What kind of pics you want? I can e-mail some pics of my truck to you...
|
forexfour
GenIII
5/10/2004
09:50:17
| RE: Rancho 3
IP: Logged
Message:
you can click on my link below and see what I have.
Forexfour's Home
|
Father Time
Dodge Dakota
JOIN HERE
5/12/2004
22:27:58
| It`s been over 3 yrs. since this was started...
IP: Logged
Message:
doesn`t anyone read around here!
Jamie....ppplleeaassee tell me you have a 3in (NOT A 4in) bodylift on your truck!...and no there`s no way to make that Rancho gain 3 MORE inches.
|
RICK
Dodge Dakota
JOIN HERE
5/14/2004
08:11:00
| RE: Rancho 3
IP: Logged
Message:
Does anyone know if 33" tires will fit on a 01 quad 4x4 with a 3" Rancho suspension lift? And can I drop down to 15" rims?
|
Donkey
Dodge Dakota
JOIN HERE
5/14/2004
18:23:05
| RE: Rancho 3
IP: Logged
Message:
I run 33" tires on a 01 club cab 4x4. I had to trim the fender wells a little to prevent rubbing when I turn hard.
I stayed with 16" wheels. Don't know about the 15". Might have trouble clearing the brake calipers but I don't know for sure.
|
Evan
Dodge Dakota
JOIN HERE
5/15/2004
17:32:53
| RE: Rancho 3
IP: Logged
Message:
i have a 3" Rancho lift and a 3" body lift on my 99 4x4 dakota with 33" bfg muds. before i put the body lift on the tires hella rubbed even after i cut the fenders. now with 6" instead of 3" they clear fine and it looks great. i have pics if anyone wants to see how it looks.
Evan
|
97DakSport4x4
Dodge Dakota
JOIN HERE
6/17/2004
22:48:17
| RE: Rancho 3
IP: Logged
Message:
Evan....I'd like to see your truck pics. Pass on a link or email them to jbe2690@hotmail.com Thanks
|
dan
Dodge Dakota
JOIN HERE
6/18/2004
01:10:29
| RE: Rancho 3
IP: Logged
Message:
Rick,
I think it is just the 03 and 04 dak's that will only accept a 16 inch or bigger rim. You can chekc it out, but I think that your dak will allow 15" rims, unless someone upgraded the brake system.
Dan
|
4x4Dak
Dodge Dakota
JOIN HERE
6/18/2004
10:01:11
| RE: Rancho 3
IP: Logged
Message:
Rick,
Yes you should be able to go down to 15" rims. That's what I have on my truck.
http://photos.yahoo.com/dakotaqc4x4
01 QC 4x4 4.7 5spd
HO Cams, Volant CAI, 40 srs Flowmaster, 180 stat, Ported TB, KB Flash (not worth the money), Amsoil & Water Wetter, 3" PA, 3" Rancho, 35" Pro Comp MT’s, RS9000X's, Smitty Nerf Bars, Westin Safari Bar w/ 2 KC 150wt HiLites, Clear Corners, Brembo Slotted Front Rotors and Hawk Brake Pads
|
big dawg
Dodge Dakota
JOIN HERE
6/18/2004
18:52:52
| RE: Rancho 3
IP: Logged
Message:
heres mine i have the 3" rancho and 3" body lift with 33" thorndirds
www.dtwtrucks.com/bigoleboi
|
CA quad man
Dodge Dakota
JOIN HERE
6/18/2004
20:28:35
| RE: Rancho 3
IP: Logged
Message:
Rick, I have the rancho kit instructions for the RS6560 right in front of me and I quote:... " 16x7 OE wheels can be reinstalled; 15 inch OE wheels will not fit this suspension system"...This is in section L. of the instructions you can find on gorancho.com. It also states:..."This suspension system was developed using the following tire & wheel combination: 265/75 R 16 wheel with 5" of backspaceing."...The issue with the 15" from what 4wheelparts told me was that with the larger "knuckles" in the kit, the 15's will not work. If you look under your truck you will see that the bolt that holds your spindle on to your knuckle is in the back spaceing of your rim (unlike most trucks) and there is only about 1/4" of space between the bolt with the coter pin and the rim (if you have 15' wheels with 51/2" back spaceing which is what the OE 15's have. So if you have the bigger knuckle from the kit, the bolt will hit the rim. Now this is Rancho talking. I not sure if their just covering their ass's or what, but I just purchessed some OE 16" wheels so I could install the kit for my 00 quad Cab.
|
forexfour
GenIII
6/21/2004
10:58:47
| RE: Rancho 3
IP: Logged
Message:
I run 15" stock rims with the Rancho lift.
Forexfour's Home
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
