| From | Message |
Jon
Dodge Dakota
JOIN HERE
5/11/2008
19:07:59
|
 Subject: 32"????
IP: Logged
Message:
Will 32" tires go on a 2003 QC 4x4 without a lift?
|
Travis
GenIII
5/12/2008
10:54:11
| RE: 32"????
IP: Logged
Message:
I had them on my truck without a lift. They rubbed a little. R you on stock wheels? I had AE589's. Stock may rub less or not at all. Also depends on if you go with a MT or AT or even just a street radial as they are all a little differtent size. When I had MTs with a real squared off tread pattern my truck would rubs with 32s lifted. Currently I am running a cooper radial thats real round and they never rub even off road. Hope this helps. I also think the 03 is still the same as the 00 style.
00,CC,SLT,4.7,Auto,4X4,3" Cat back, 3" PA Lift with 32's
|
jon
Dodge Dakota
JOIN HERE
5/12/2008
12:00:45
| RE: 32"????
IP: Logged
Message:
Well I want to put BF Goodrich All-Terrains 32" on, but I def don't want any rubbing, and I don't have a body lift on yet, so I'm a bit worried. I have the stock rims on there right now, but would like to change that in a few months.
|
Bucket
GenII
5/13/2008
09:53:18
| RE: 32"????
IP: Logged
Message:
Body lifts are inexpensive so why not get it at the same time as the new tires and avoid the chance of rubbing,my 32s rubbed bad but my swampers are are larger than the stated size with an aggressive tread,so a street tread with a BL might work.
|
greendak01
Dodge Dakota
JOIN HERE
5/18/2008
11:45:36
| RE: 32"????
IP: Logged
Message:
i had 32X1150 on the stock rims for a while, they didn't rub as long as you lift the torsion bars, now i have aftermarket rims and with the off set they rubbed just a tiny bit, but with the stocks, nope, i also have a single cab which sit a tiny bit higher, but my dad has a quad cab and they rub very minimal, if you want, just trim the plastic where they rub, its like a half inch or so.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
