| From | Message |
Georgia Dak
Dodge Dakota
JOIN HERE
3/27/2008
19:18:01
|
 Subject: Cb radio installation
IP: Logged
Message:
I will be installing a cb on my 2000 quad cab 4x4 and was wondering if anyone had any tips to as of where i should run the coaxial. I do not really want to drill any holes and was wondering if there was any way around drilling.
|
greendak01
Dodge Dakota
JOIN HERE
3/27/2008
20:23:04
|  RE: Cb radio installation
IP: Logged
Message:
i mounted my cb under the radio and ran the coaxial under the 4X4 floor console and under my seat and out the back slider window.. i have a regular cab tho... but it should be the same.... my friend ran his under his seat and up the door jam since he doesn't have a slider rear window.
|
Georgia Dak
Dodge Dakota
JOIN HERE
3/28/2008
16:14:40
| RE: Cb radio installation
IP: Logged
Message:
where did he exit the door jam?
|
cber
Dodge Dakota
JOIN HERE
3/30/2008
15:42:35
| RE: Cb radio installation
IP: Logged
Message:
Check for a rubber plug under the carpet in your truck you can run it through there or drill a hole in the floor and put a rubber wire bushing around it to prevent moisture.
|
bowhunter618
Dodge Dakota
JOIN HERE
3/30/2008
18:18:59
| RE: Cb radio installation
IP: Logged
Message:
There was a hole behind the rear seat on the driver side. You will have to take the seat out and pull the carpet up to get to it. After you run the cable through the hole put a rubber wire brushing around it. Its really easy to do just a little time consuming.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
