| From | Message |
terry
Dodge Dakota
JOIN HERE
2/01/2008
03:04:21
|
 Subject: vacuum switch
IP: Logged
Message:
can anybody explain to me the step by step procedure in replacing the vacuum switch on the transfer case installed on a 1988 dakota le,3.9ltr.engine 4wd. thank you.
|
Walt_Felix
Dodge Dakota
JOIN HERE
2/04/2008
11:31:27
|  RE: vacuum switch
IP: Logged
Message:
Unscrew the old one and screw the new one in. It's a simple unit with a threaded end. Looks kind of like an oil pressure sending unit but has 4 vacuum hoses connected to it. The fitting with the hoses are keyed to only go on one way.
|
terry
Dodge Dakota
JOIN HERE
2/05/2008
01:59:26
|  RE: vacuum switch
IP: Logged
Message:
thanks walt for the info. can this unit be disassembled and be serviced or cleaned. mine seems to be sticking because when i shift back to 2wd it wont shift and the indicator lite stays on. in order for me to get it to shift back to 2wd,i tap the switch with a hard object and the lite will go out and sure enough it will be on 2wd.
|
Walt_Felix
Dodge Dakota
JOIN HERE
2/05/2008
10:31:36
| RE: vacuum switch
IP: Logged
Message:
No, it's a self contained unit. You just change the whole piece.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
