| From | Message |
Mason
Dodge Dakota
JOIN HERE
5/02/2006
11:24:41
|
 Subject: Front Bearing Assm
IP: Logged
Message:
Has anybody had issues removing the front bearing assembly from the part its bolted to. i hear my bearing whining and when i removed the 3 bolts i still could not take the bearing assmbly off. I beat it with a hammer, i tried to pry it with a bar but nothing.
|
Moser
Dodge Dakota
JOIN HERE
5/02/2006
20:26:13
|  RE: Front Bearing Assm
IP: Logged
Message:
I've replaced both my front hubs on my '92. I thought I remember 4 equally spaced bolts holding them on. I also remember hammering for 20 mins. on one side as well to remove the hub from the knuckle. An air hammer would be quicker but I didn't have access at that time. Oh yeah, the hub fell apart into the 3 pieces quickly which didn't help.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
