| From | Message |
BeerHat
Dodge Dakota
JOIN HERE
3/29/2006
16:07:48
|
 Subject: Polyurethane Frontend bushings
IP: Logged
Message:
Hey guys
I'm lookin for a poly bushing set (or just control arm bushings) for the frontend of my 01' 4x4. No luck searching on the web... wondering if anyone knew where I can buy'm.
Thanks,
Dan
|
Walt_Felix
Dodge Dakota
JOIN HERE
3/29/2006
16:29:02
| RE: Polyurethane Frontend bushings
IP: Logged
Message:
Don't know about an '01 but a few years back when I was looking for poly bushings for my '88 the only bushings available were the stock rubber ones from the dealer and they only came pre-installed in the control arms. I couldn't by them separate.
Walt
|
Tony
Dodge Dakota
JOIN HERE
4/12/2006
12:50:10
| RE: Polyurethane Frontend bushings
IP: Logged
Message:
Summit has them. At least for 1999. Think they were called PROTHANE. Nice red ones, too. The package claimed compatability up to 2002. I did both upper & lowers & threw in new sway bar bushings while I was at it. I have a '99 4x4 5.2L CC.
|
Tony
Dodge Dakota
JOIN HERE
4/12/2006
12:52:17
| RE: Polyurethane Frontend bushings
IP: Logged
Message:
Also, there is a write up on this somewhere, cause there is a whole process of getting out the old ones & putting the new ones in. I remember using a propane torch to soften the old bushings up & pulling them out.
|
Ibelyna
Dodge Dakota
JOIN HERE
5/09/2006
16:34:38
|  RE: Polyurethane Frontend bushings
IP: Logged
Message:
http://www.fly-n-hi.com/energy.html
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
