| From | Message |
just some kid
Dodge Dakota
JOIN HERE
2/21/2006
11:56:51
|
 Subject: for the experienced
IP: Logged
Message:
ok guys i have a stock 94 4x4 and would like to know is it possible to run a 31x11.50 on a stock wheel with out any lift, if thats not possible then what is the amount of lift needed,or could i get by with differnt wheels with less back spacing? thats what im really going for a little taller and a wider stance, my friend says he had 32s on stock wheels, no lift, no rubbing i find that hard to belive so i want to here your thoughts
thanks
|
Bucket
GenII
2/21/2006
21:24:04
|  RE: for the experienced
IP: Logged
Message:
Trust me mines a 94 with 32s and they WILL rub,however if you go 31 with torsion bars cranked you might be ok,ive got 3.5 backspacing and they still rubbed the fenders so maybe with 4 even on the backspace i would have been better off.
|
just some kid
Dodge Dakota
JOIN HERE
2/22/2006
10:23:57
| RE: for the experienced
IP: Logged
Message:
would a 3 inch body lift do the trick and if i went with 31s what is the widest i could go with 4 inch back spacing
thanks
|
Bucket
GenII
2/23/2006
10:29:42
| RE: for the experienced
IP: Logged
Message:
you could comfortably fit 31x11.5 and possibly......possibly 12.5 and with 3" body lift and torsion bars cranked and 4" backspacing you might do well with 32x11.5 as long as you dont go crazy offroading...too much articulation could cause the 32s to rub the fenders which i think are awfully small on a 94,but be careful cause some 32s are the same size as 33s,i measured my 32s right next to a buddies 33 bfg mudders and the were identicle in height.
|
Paul
Dodge Dakota
JOIN HERE
2/23/2006
10:39:41
| RE: for the experienced
IP: Logged
Message:
I have 31X10.50X15 and they do rub at full lock when flexing... but my truck has no lift or torsion crank and they fit well.
Here's my truck.
http://www.cardomain.com/ride/2050749
|
just some kid
Dodge Dakota
JOIN HERE
2/23/2006
11:46:07
| RE: for the experienced
IP: Logged
Message:
hey paul did you notice any height gain with the 31s i think stock tires are only 28s
|
just some kid
Dodge Dakota
JOIN HERE
2/23/2006
11:47:58
| RE: for the experienced
IP: Logged
Message:
bucket how far would my tires stick out if i did do 4 inch backspacing and 31x11.5
|
Paul
Dodge Dakota
JOIN HERE
2/23/2006
17:09:24
| RE: for the experienced
IP: Logged
Message:
Yea i would say about an exact amount of 2.5" which makes it sit way taller than a stock 2wd Gen 2 (one of my friends owns one) Yea, Dunlop Mud Rovers... work great in the mud on are quite loud on the road... Just the way i like it.
|
Bucket
GenII
2/23/2006
19:07:20
| RE: for the experienced
IP: Logged
Message:
I would say with 4" backspace and 11.5 wide you would stick out an inch more than a normal tire.
|
just some kid
Dodge Dakota
JOIN HERE
2/24/2006
09:00:35
| RE: for the experienced
IP: Logged
Message:
really only an inch? i have fender flares and that wouldnt even be noticable...
|
Bucket
GenII
2/24/2006
09:56:25
| RE: for the experienced
IP: Logged
Message:
Personally i think they look pretty cool when the tire sticks out,but some states wont allow that
|
just some kid
Dodge Dakota
JOIN HERE
2/24/2006
14:39:18
| RE: for the experienced
IP: Logged
Message:
hell yea it looks cool thats why i want more than an inch haha
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
