| From | Message |
4x44.7
Dodge Dakota
JOIN HERE
12/15/2005
21:51:47
|
 Subject: torsion bars
IP: Logged
Message:
i was wanting to know exactly where the torsion bars are located?
|
FreeMyWilly
Dodge Dakota
JOIN HERE
12/16/2005
00:14:11
|  RE: torsion bars
IP: Logged
Message:
On a 4x4.
Do you have a 4x4?
Do you know how to tell if you have a 4x4?
If you have a 4x4, there will be torsion bars!
Har har.
|
nabobz
Dodge Dakota
JOIN HERE
12/16/2005
09:54:41
| RE: torsion bars
IP: Logged
Message:
Your torsion bars are the long bars that run from the front to back from the lower A arm by the front wheel to a key about halfway between the wheels.
|
South Kota
Dodge Dakota
JOIN HERE
12/17/2005
01:33:58
|  RE: torsion bars
IP: Logged
Message:
The torsion bars start at the transfer case cross-member and run to the A-arms up front.
|
4x44.7
Dodge Dakota
JOIN HERE
12/17/2005
12:46:46
| RE: torsion bars
IP: Logged
Message:
thanks for the responses.. and if you would look at my name u would see that it is a 4x4
|
4x44.7
Dodge Dakota
JOIN HERE
12/17/2005
15:42:02
| RE: torsion bars
IP: Logged
Message:
oh and one more question do you need a front end alignment after you adjust your torsion bars?
|
lone wolf
Dodge Dakota
JOIN HERE
12/17/2005
16:12:29
| RE: torsion bars
IP: Logged
Message:
yes, it is a good idea to have your allignment adjusted anytime you play with the suspention
|
PB
Dodge Dakota
JOIN HERE
12/17/2005
17:10:09
| RE: torsion bars
IP: Logged
Message:
I have a 93 318 4x4 how far could i tourque the torsion bars and still have a decent driveability
|
South Kota
Dodge Dakota
JOIN HERE
12/18/2005
12:31:14
| RE: torsion bars
IP: Logged
Message:
PB, you could max out those t-bars and still have driveablitiy, but that is not recommended. I did mine 2 1/2" and is still very drivable, and is alot better off road. Just make sure you look at everything up front after you do that, I hads to change out my front shocks after that.
|
dakota adjust
Dodge Dakota
JOIN HERE
2/08/2007
19:18:56
| RE: torsion bars
IP: Logged
Message:
I have a 1998 dakota 4X4 and I would like to put arm in it on a chevy you tighten the bolts.
But my dodge the bolts are all the way in. Does this mean I loosen the to lift? I have a plow for it this is why.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
