| From | Message |
N. DAKOTA Z
Dodge Dakota
JOIN HERE
6/21/2005
19:00:51
|
 Subject: 94 DAKOTA Z
IP: Logged
Message:
I HAVE A 94 DAKOTA WITH THE EXTENDED CAB!
4X4
5.2L 5 SPEED
I HAVE MADE QUITE A FEW MODS TO THE ENGINE
AND WOULD NOW LIKE TO INSTALL A SUSPENSION LIFT!
MORE THEN LIKELY THE TRAILMASTER 4" AS ABOUT THE ONLY ONE I HAVE FOUND??
I WOULD ALSO LIKE TO RUN MOUNTAINCRUSHER 15" X 8" WHEELS THEY HAVE A 4.625" BACKSPACE WITH INTERCO 31"X 10.5" X 15" TRXUS M/T SKINS! I DO NOT SEE THESE WHEELS ON THIS STYLE P.U VERY OFTEN AND WAS WONDERING IF ANYONE HAS THIS SETUP AND IF THERE ARE ANY PROBLEMS?? THANKS FOR THE INFO IN ADVANCE!!
N.DAKOTA Z
|
other bill
Dodge Dakota
JOIN HERE
6/24/2005
12:16:03
|  RE: 94 DAKOTA Z
IP: Logged
Message:
YOUR WHEELS/ TIRES WILL PROBABLY RUB ON THE UPPER CONTROL ARM SPACERS THAT COME IN THE KIT. THE RECOMMENDED BACKSPACING FROM TRAILMASTER IS 3.25". I HAVE THE 15X8 EAGLE ALLOYS WITH 3.25" BACKSPACING ALONG WITH BFG A/T 33X10.5 AND HAVE ABOUT 1" OF CLEARANCE BETWEEN THE TIRE AND SPACER. I BELIEVE WALT INGRID HAS A COPY OF THE PARTS LIST OF THE KIT ON HIS SITE (ALONG WITH VERY DETAILED PHOTOS). LOOK THERE AND YOU SHOULD UNDERSTAND WHAT I AM TALKING ABOUT.
Side note: The 31s may look small with the 4" lift. Don't get me wrong, they will work(the tires that is). I ran my 31's after the supension AND body lift for a while, they just looked a bit small for the new height. Then when I got 33s they rubbed when off-roading. Then I got the cut out fiberglass fenders from Glassworks! Once you start modifying, oh how the mushroom grows.
|
Luc
Dodge Dakota
JOIN HERE
6/26/2005
16:13:27
| RE: 94 DAKOTA Z
IP: Logged
Message:
i've got the 33x12.5x15 interco trxus on my stock 99' rims with a 3in b-lift
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
