| From | Message |
J.R.
Dodge Dakota
8/28/2001
23:38:50
|
 Subject: 98 Club 2x4 body lift
IP: Logged
Message:
While looking at lift kits on-line I noticed that there was another product being offered, some sort of gaurd to be installed under the fenders to keep the engine compartment clean of mud and road grim. Is this something that is needed along with a 2-3 inch body lift on Dakotas?
|
Hawkeye
*GenIII*
8/29/2001
06:35:43
|  RE: 98 Club 2x4 body lift
IP: Logged
Message:
They are Gap Guards or Lift Lips. They are basically plastic covers that cover the gap left after you lift it so the as you said, crap doesnt get on the engine and also so you cant see under the bed from one side to another. They are not very expensive. About $30 - $40.
'00 QC 4x4
4.7 3.55 LSD
33x12.50 Pro Comp X-T's
|
danial
Dodge Dakota
JOIN HERE
12/05/2012
11:16:26
| RE:2x4 body lift
IP: Logged
Message:
Okay, i was looking for a body lift for my dodge and i was in the shop and just happened to have a piece of scrap 2x4 wood and i wondered if i could use them as a lift?
|
daddio
Dodge Dakota
JOIN HERE
12/06/2012
19:20:57
|  RE: 98 Club 2x4 body lift
IP: Logged
Message:
Yeah you can use them but i'm not sure if the wood would be strong enough. I prefer hockey pucks instead of wood if you really want the cheapest body lift, i think you would need about 20-25 of them and all you have to do is drill holes in the center of them that is the same diameter as your body mount bolts. Better safe than sorry is the way to go.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
