| From | Message |
Bubbles
Dodge Dakota
JOIN HERE
3/20/2005
18:30:20
|
 Subject: Back Spacing
IP: Logged
Message:
How much backspacing do I need on some wheels to fit 33x12.5 BFG A/T and get no frame rubbing at full turn.
I've heard 4-4.5 inches? Is that enough or too much?
How muck spacing is there on stock wheels?
I'd rather not have to put a 3" rancho on if I can help it.
I'm pretty new to this site so any insight would be helpfull.
Also what are some of the best fuel savers out there, besides going to 31's.
99, Dak, c/c, slt, 31x10.5 bfg's,15x8 stock wheels
|
Frank D.
Dodge Dakota
JOIN HERE
3/20/2005
19:35:35
|  RE: Back Spacing
IP: Logged
Message:
Stock wheels are like 5.5 " BS, I run 4.25 BS on the stock wheels bc I have a 1.25" spacer, I have almost no frame rub, only time it rubs is at full lock off road.
|
Bubbles
Dodge Dakota
JOIN HERE
3/24/2005
21:25:55
| RE: Back Spacing
IP: Logged
Message:
Thanks
Are you happy with your 1.25 spacers? I've heard some good and bad stuff about using them. Have you broken off any studs at all?
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
