Message: Do you think that i could fit on 35's with a six inch lift for my 2000 4.7 4X4 dakota. And with a six inch suspension do you think i would have to extend my drivshaft or anything else. It is also independent front suspension
Message: even trucking suspension. That is the only lift i can find for a 2000 dakota besides the 3 inch rancho. i would like to find one bigger than 3. Any suggestions? Thanks
Message: They are both crap. The only decent one is Rancho 3"..you can add a 3" body for 6" total. Thats about all you can do, besides get a different truck or do a Solidaxle setup.
Message: All right without making this a long post....
In order to do a sas on your Dakota you will have to remove everything that your Dakota has in the front suspension.You basically are going to start from scratch and design and build yourself a new front end.
Message: Actualy u can get up to 2 inches of lift on the front end by tighting ur tortion bars. On my truck i cranked the tortion bars to got 1 and 3/4 of an inch on the front and to level it off i put a 1 inch lift block on the back.
Subject: how high
RE: how high
