From | Message |
tomwilson74 Dodge Dakota JOIN HERE ![Email](http://www.dodgedakota.net/amb/icons/email.gif)
8/05/2004 22:08:55
|
Subject: torsion bars IP: Logged
Message: I have heard that adjusting the torsion bars on the 2004 Dakota will level the front end with the back end. I would like to raise the front 1 1/2 to 2 inches. Would working with the torsion bars do this and just exactly how do I do this with the bars??
|
Kowalski GenIII
![User Profile](http://www.dodgedakota.net/amb/icons/profile.gif)
![](http://www.dodgedakota.net/members/profiles/1609
/thumbnail.gif)
8/07/2004 08:14:29
| RE: torsion bars IP: Logged
Message: Yes - jack up and support front end, tighten the adjustment bolts at the rear of the torsion bars, and realign. Check height and readjust yo get desired height. Or just ask the alignment guy to do it. Try to find a good alignment guy - some are real hackers.
Lead, follow, or get out of the way
|
Verde SAR dog Dodge Dakota JOIN HERE ![Email](http://www.dodgedakota.net/amb/icons/email.gif)
9/22/2004 21:10:59
| RE: torsion bars IP: Logged
Message: I put heavy duty v8 torsion bars on my 94 v6, tweeked them all the way up got a front end alingment, put 2" spacers under the rear springs, rancho rs5000's all the way around.... nice!
Oh and a mile marker hydraulic winch on the fornt
|
RanchoDakota Dodge Dakota JOIN HERE ![Email](http://www.dodgedakota.net/amb/icons/email.gif)
9/22/2004 21:19:40
| RE: torsion bars IP: Logged
Message: be careful with the ball joints though. they tend to where just a little fast and even faster with the torsion bars cranked up on dakotas but i will end up jacking mine up to but just warning you.
|
Kowalski GenIII
![User Profile](http://www.dodgedakota.net/amb/icons/profile.gif)
![](http://www.dodgedakota.net/members/profiles/1609
/thumbnail.gif)
9/25/2004 08:04:41
| RE: torsion bars IP: Logged
Message: That's what they claim, I guess, but still no problem with original ball joints here. Been raised for a couple of years.
Lead, follow, or get out of the way
|
RanchoDakota Dodge Dakota JOIN HERE ![Email](http://www.dodgedakota.net/amb/icons/email.gif)
9/26/2004 19:16:28
| RE: torsion bars IP: Logged
Message: thats good i will end up doing it probably but can you still do it even if i get the rancho three inch suspension lift?
|
Timberwolf GenIII
![User Profile](http://www.dodgedakota.net/amb/icons/profile.gif)
![](http://www.dodgedakota.net/members/profiles/1384
/thumbnail.gif)
9/27/2004 20:36:09
| RE: torsion bars IP: Logged
Message: You can get up to 2" of lift from cranking the bars, but be forewarned that it will stiffen up the ride quite a bit .
|
roy Dodge Dakota JOIN HERE ![Email](http://www.dodgedakota.net/amb/icons/email.gif)
9/27/2004 23:36:48
| RE: torsion bars IP: Logged
Message: will that work for my 1999 5.2 V8 also?
|
Kowalski GenIII
![User Profile](http://www.dodgedakota.net/amb/icons/profile.gif)
![](http://www.dodgedakota.net/members/profiles/1609
/thumbnail.gif)
9/28/2004 16:11:13
| RE: torsion bars IP: Logged
Message: Yup.
Lead, follow, or get out of the way
|
| P 1 |
|
Post a reply to this message:
Username Registration: Optional All visitors are allowed to post messages
|