| From | Message |
BIGTYMER
Dodge Dakota
JOIN HERE
6/04/2004
09:41:47
|
 Subject: control arms?
IP: Logged
Message:
What are the differences between 2wd and a 4wd control arms other than the torsion bar keyways and the shock mount? Could 2wd control arms bolt to the 4wd frame mounts and would a 4wd hub bolt in place of a 2wd spindle? Basically I know they make arms for a 2wd that are 3" longer and provide like 3" lift. Could I put that on a 4wd as long as I don't plan to use the torsion bars?
|
rivermaniac
Dodge Dakota
JOIN HERE
6/04/2004
09:48:13
| RE: control arms?
IP: Logged
Message:
nope the geometry is different , where they hook up to the frame is different , the 4by has no springs and no housing ...........totally different , plus the spring is what gives you the lift ......................
|
ludakris
Dodge Dakota
JOIN HERE
6/04/2004
16:07:30
| RE: control arms?
IP: Logged
Message:
Even if they did mount up, the extra lenght would screw with the front cv shafts. they would probably be at a bad angle and wear, or they would be too short and wear.
|
rivermaniac
Dodge Dakota
JOIN HERE
6/05/2004
02:21:01
| RE: control arms?
IP: Logged
Message:
bigtimer if you want pics of custom jobs on 2wd daks I have , 4 by i have in sas , I pics of a 4by durango that went 2wd , can't get axles for the front ..............
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
