| From | Message |
GraphiteDak
GenIII
 
4/05/2004
00:35:13
|
 Subject: Tested out my 2 inch lift and HO cams!
IP: Logged
Message:
I finally went out romping my truck since I lifted it 2 inches via a torsion crank and small blocks. It REALLY stiffened up the front enough to where it now finally doesn't bottom out so easily.
I also just installed my HO cams. It ran like a raped ape!
I posted these on the other thread, but check them out.
http://www.paysonarizona.net/Home%20Videos/Mud%20Romp_02_StuckInTheMud.mpg
http://www.paysonarizona.net/Home%20Videos/Mud%20Romp_01_ThroughTheWater.mpg
|
dakman
Dodge Dakota
JOIN HERE
4/05/2004
18:06:13
| RE: Tested out my 2 inch lift and HO cams!
IP: Logged
Message:
do you have cat's on your exhaust or is it just flowmaster
|
GraphiteDak
GenIII
4/05/2004
20:03:40
| RE: Tested out my 2 inch lift and HO cams!
IP: Logged
Message:
The exhaust is all stock, single cat (I have a 2003) and the muffler is a 3" Flowmaster 40 series reduced down to the stock 2 1/2" pipe and a 3" chrome tail pipe I welded on at the tip.
It DOES sound bad a$$ I think and everyone else who talks to me thinks so too. Definitely gets the RICERS to turn their heads in pure AWE of why their pop corn machine can't sound like this! It sounds great, so much that when I DO go to a true dual setup I hope it sounds as good as it does now.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
