| From | Message |
elixir
Dodge Dakota
JOIN HERE
2/26/2004
20:11:05
|
 Subject: fabtech lift
IP: Logged
Message:
i plan to get the 3" fabtech supsension lift, will i be able to run 33's, or will they rub. and if i could, what size would i need
|
Kory
Dodge Dakota
JOIN HERE
2/28/2004
17:52:07
| RE: fabtech lift
IP: Logged
Message:
Elixir,
Try using the search function to find your answer. I've got a 4X4, so unfortunately Fabtech doesn't offer a kit for my truck, but I know this question has come up quite often, so you should be able to find a whole bunch of answers.
~Kory
|
hollerdawg
Dodge Dakota
JOIN HERE
2/29/2004
00:10:30
| RE: fabtech lift
IP: Logged
Message:
the guy at my local off road shop were having this same discussion the other day cuz i was plannin on doin the same and he said that he had a guy with the fabtech 3" and ran 33's and only rubbed in a hard turn just make sure u got the right backspacing other wise for sure they will rub so at least 4.5" backspacing more would be better, but then again i guess it all depends on what brand of tire u get too cuz not all 33's are true 33's so take that into consideration too, but the backspacing is a must for sure
|
rivermaniac
Dodge Dakota
JOIN HERE
2/29/2004
18:46:05
| RE: fabtech lift
IP: Logged
Message:
this has been beaten to death already fabtech 3"=31x10.5 with 3.25 back , with a 15x7 rim =32x11.5 4" back , fabtech 3"+3" bodylift = 33x12.5 on the 15x8 3.25 back .............
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
