| From | Message |
94dakota
Dodge Dakota
JOIN HERE
2/26/2004
19:38:46
|
 Subject: Gears?
IP: Logged
Message:
when i get 31's on my truck will there be a noticeable diffrence in power. should i get gears for just getting this size tires if so what.
thanks
|
DakotaGuy
Dodge Dakota
JOIN HERE
2/27/2004
14:20:50
| RE: Gears?
IP: Logged
Message:
I was thinking for some reason my dakota may have come stock with 31's. So I wouldnt worry about it.
|
LJ
Dodge Dakota
JOIN HERE
2/28/2004
02:18:53
| RE: Gears?
IP: Logged
Message:
If your speaking of a 94 Dak as your name states...i dont think those came stock with 31's, so you may need to. The GenIII came with either 3.55 or 3.92 gears with 31" tires. But i guess the output of the motor would factor in with the axle gearing too. Ok, i dont really know, maybe someone else does:(
|
Josh
Dodge Dakota
JOIN HERE
2/28/2004
18:49:00
| RE: Gears?
IP: Logged
Message:
You dakota came stock with 3.55 gears. I have a 93, 4x4,extended cab, with the same gear ratio without a lift and I have 31s on my truck. There is a little difference but it's not that great. I wouldn't swap out gears unless you want to.
|
94dakota
Dodge Dakota
JOIN HERE
3/03/2004
18:00:46
| RE: Gears?
IP: Logged
Message:
thanks, na it comes with like 235/75 or some metric but there about 29inchs
thanks
matt
|
brandou10l
Dodge Dakota
JOIN HERE
3/14/2004
12:03:17
|  RE: Gears?
IP: Logged
Message:
i have a v6 dakota w/ 33s and 4.10's and its still could be a little lower but with only 31's i think the best ratio 4 u would be the 3.92 but the 3.55 should do ok. if u have a 4x4 its about $500-600 to install ring and pinions with all the necessary bearing seals etc. thats what it cost me to do it myself. it wasnt that hard the chrysler has a good setup which makes setting backlash very easy. ne more questions about the setup e-mail me
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
